Loading ...
Loading ...
Loading ...
Installation
40
3. Secure the upstand to the worktop by
tightening the screws A.
Assembling the toe skirt (on some models
only)
The toe skirt must always be positioned and
secured correctly on the appliance.
1. Use a screwdriver to remove the
highlighted screws.
2. Align the toe skirt with the corresponding
holes on the appliance.
3. Fasten the toe skirt using the screws that
were previously removed.
5.5 Electrical connection
General information
Check the grid characteristics against the
data indicated on the plate. The
identification plate bearing the technical
data, serial number and brand name is
visibly positioned on the appliance. Do not
remove this plate for any reason.
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• Use personal protective equipment.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the mains supply.
• Do not pull the cable to remove the
plug.
• Use cables withstanding a temperature
of at least 90°C.
• The tightening torque of the screws of
the terminal board conductors must be
1.5 - 2 Nm.
Loading ...
Loading ...