Loading ...
Loading ...
Loading ...
36
Pre-programming remote controller
You can make RC-478M remote controller to operate a product
from other brand than Onkyo by storing the pre-programming code
of the brand in the RC-478M.
Brand TV VCR DVD
AIWA 137
AKAI 227
DENON 302, 309
EMERSON 228
FISHER 200 100, 101, 102, 140
GE 103, 104
GE • PANA 201, 202
GE • RCA 203
GO VIDEO 105, 106, 107
GOLD STAR 204, 205 108
HITACHI 206, 207 103, 109 303
JVC 208 110, 111, 112, 113 304
KENWOOD 305
MAGNAVOX 209, 210 114, 115, 116 306, 313
MARANTZ 211 307
MITSUBISHI 117, 118, 119, 120, 308, 313
121, 139
Numeric
buttons
VCR
TV
DVD
ENT
Learning a pre-programming code
1. Find the 3-digit number for the brand name of
the component that you want to operate in the
table on this page.
2. Turn on the component that you want to
operate (i.e. DVD, VCR, or television).
3. While holding down VCR, TV or DVD on the
RC-478M that you want to program, press ENT,
and then release both buttons.
4. Within 10 seconds, enter the 3-digit code
number.
To enable entry of the 3-digit code number, some of the remote
controller keys become the numeric keys with the assignment
as shown in the figure.
5. Press some operation buttons for the
component that you want to operate to check if
the system operates properly.
If the system operates properly, the code is correct. If the
component does not operate properly, return to step 3.
Notes
• With some brand’s components, some buttons may not work
correctly.
• If more than one code is given in the table, try the code one by
one until you reach the code for your component (i.e. if the first
code does not work, then try the next).
Brand TV VCR DVD
NEC 136
ONKYO 300, 301,
313
PANASONIC 212, 213 122, 123 309
PHILIPS 214 114
PIONEER 215 310
PROSCAN 216 311
RCA 217, 218, 219, 109 311
220, 229, 230
SAMSUNG 221, 222 124, 125, 126
SHARP 223 127, 128
SHINTOM 138
SONY 224 129, 130, 131, 312
132, 133, 141, 142
TOSHIBA 134 313
YAMAHA 309, 314
ZENITH 225, 226 135 313, 315
Loading ...
Loading ...
Loading ...