Loading ...
Loading ...
gate configurations (choose which best fits your scenario)
Measure the width of the opening where you intend to install the
gate. Refer to the following illustrations to determine the correct
installation configuration. Baseboard molding may change which
configuration is appropriate.
A B
C D
E
G H
(36 in. - 39 in.) without extension (40 in. - 43 in.) with short extension
(43 in. - 46 in.) with medium extension (46 in. - 49 in.) with one long extension
NEVER install three extension frames
on the same side of the gate.
WARNING
!
Note: This instruction book
illustrates installation of gate
configuration H. If choosing gate
configuration A, skip ahead to step
2. Otherwise, follow step 1 using
the appropriate extension frames
that best fit your scenario.
!
Important: Gate includes door
stoppers (parts O and H) which
prevents the gate from swinging open
in one direction. When installing the
gate at the top of stairs, be sure that
the door stops are engaged on the
opposite side of the stairs so the gate
door cannot open over the stairs.
3
F
(46.75 in. - 50 in.) with short and the medium extensions (49.75 in. - 53 in.) with short and the long extensions
(52.75 in. - 56 in.) with both short and the long extensions (56.75 in.- 60 in.) with short, medium, and long extensions
Loading ...
Loading ...
Loading ...