Loading ...
Loading ...
Loading ...
9
bromic.com/heating-au
HEATING INSTALLATION INSTRUCTIONS CONTINUED...
CEILING RECESS (SOLD SEPARATELY)
!
WARNING
The heater shall, under no circumstance, be covered with
insulating material or similar material.
!
WARNING
Joists, beams and rafters shall not be cut or notched
to install the heater.
WARNING
Instructions below are suitable for ceiling surfaces
10-30mm thick. For ceiling surfaces thicker than 30mm,
contact Bromic for alternative installation options.
!
WARNING
In ceiling recess installation, the heater must be
completely protected against water contact
from above.
!
500mm/19.6"
500mm/19.6"
870mm/34.2" (2300W)
1305mm/51.4" (3400W)
CLEARANCE TO COMBUSTIBLES OPTION 1
CLEARANCE TO COMBUSTIBLES OPTION 2
COMBUSTIBLES
3500mm/11'6"
870mm/34.2" (2300W)
1305mm/51.4" (3400W)
COMBUSTIBLES
250mm/10"
(from glass face)
500mm/19.6"
500mm/19.6"
230mm/9.1"
COMBUSTIBLES
250mm/10"
(from glass face)
185mm/7.3" 185mm/7.3"
230mm/9.1"
COMBUSTIBLES
!
WARNING
Individual clearances to combustibles are fixed
minimums to each individual option and cannot be
combined between Option 1 and Option 2
! WARNING
MINIMUM DISTANCE BETWEEN
HEATERS MEASURED FROM EDGE OF
HEATER MUST BE AT LEAST 500mm
Loading ...
Loading ...
Loading ...