Loading ...
Loading ...
Loading ...
English 27
Installation instructions
Adjusting the oven burner air adjustment shutters
Air adjustment
shutter
Air adjustment
shutter
All oven burners have an air adjustment shutter. The purpose of the shutter is
to regulate the ow of air to the ames. Properly adjusted ames should burn
steadily with approximately 1 in of blue cone. The ames should never extend
past the edge of the burner bafes. Even though these are preset at the factory,
they should be checked and, if needed, adjusted periodically to ensure efcient
operation.
To check and adjust the oven burner air adjustment shutters:
1. Open the oven door.
2. Remove the oven racks.
3. Remove the oven oor.
4. Turn the mode selector knob from OFF to the Bake position, and then rotate
the temperature selector knob to set the temperature from the OFF position.
5. After the oven has lit, visually check the ames coming out of the upper and
lower burners. If adjustment is needed, carefully adjust the air adjustment
shutters.
The shutters are located at the base of the burner manifolds near the back oven
wall.
Adjustment air shutter (Broil Burner)
1. Remove 1 screw of Bracket-Sub and,
remove Bracket Sub.
A
B
2. Remove 1 screw (A) of Broil Burner.
3. Remove 4 screws (B) of Bracket Broil.
4. Separate Bracket Broil & Broil Burner.
INSTALL_DOP30T840GS_DA_DG68-01456A-00_EN.indd 27INSTALL_DOP30T840GS_DA_DG68-01456A-00_EN.indd 27 2022-10-06 오후 6:52:012022-10-06 오후 6:52:01
Loading ...
Loading ...
Loading ...