Loading ...
Loading ...
Loading ...
Aircraft Information
69
This restraint is certified for aircraft use when used with the
internal harness.
This child restraint is not certified for aircraft use when used as a
booster seat because aircraft seats do not have shoulder belts.
Install the child restraint in a window seat to avoid blocking the
aisle. If the aircraft lap belt is too short, ask the flight attendant for
a belt extender.
Use only on forward-facing aircraft seats. Contact the airline for
their specific policies.
Some airlines may ask to see a label
stating that this child restraint is certified
for aircraft use.
There is an airplane certification label
located on the side of this child restraint
as shown.
WARNING: Store lower anchor belt and tether
strap when installing with aircraft belts.
Forward-Facing Aircraft Installation
Follow the steps on pages 40-43, skipping
the tether strap steps.
Rear-Facing Aircraft Installation
Follow the steps on pages 29-33.
70
Attach Harness Strap Loops
to Splitter Plate As Shown
Sewn ends of the harness strap
loops must face towards you.
Do not twist harness strap or
harness adjustment strap.
Make sure the harness strap loops
are fitted completely on both sides
of the splitter plate.
Check your child’s fit often.
If you cannot achieve a snug
harness fi t for your child, see
pages 17-18.
To learn how to check harness
tightness, see pages 49-51.
Check the harness straps often
for any wear or damage.
WARNINGS: Harness system must be installed correctly.
Do not use a child restraint with damaged harness straps.
Failure to follow these steps can result in serious injury or
death.
From Back of Car Seat,
Thread Harness Straps OVER
Metal Bar
Do not twist harness straps.
sewn
end
3
4
Loading ...
Loading ...
Loading ...