Loading ...
Loading ...
Loading ...
If it moves more than 1 in. (2.5 cm), you can try:
A. Putting your knee in the seat and pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to the lower anchor belt installation if lower anchors
are available in your vehicle.
continued on next page
43
10
Check Belt Tightness
Hold child restraint at the belt
path with your weaker hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
Finished!
Check the tightness of the install
often to make sure it has not
loosened.
Securing Child in Car Seat
To properly secure your child in
the car seat, see pages 49-51.
Check your child’s fi t often
and make any needed
adjustments to the car seat
as they grow.
Forward-Facing
LATCH: Lower Anchor
+ Tether Install
44
Do not use the lower anchors of the child restraint anchorage
system (LATCH system) to attach this child restraint when
restraining a child weighing more than 40 lbs (18 kg).
Before you begin installing the seat into your
vehicle, did you check:
Your child’s weight and height?
22-40 lb (10.1-18 kg) and
29-49 in. (73.6-125 cm)
Your child’s fi t? See page 12.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
Remove Lower Anchor Belt
from Storage Location
Remove it from the rear-facing
belt path so both connectors
are on the same side of the
seat.
Loading ...
Loading ...
Loading ...