Loading ...
Loading ...
Loading ...
SUB Menu
The Sub menu is used to select a high pass frequency for use with a subwoofer or a matched
subwoofer. Available options for this selection are: OFF, 80Hz, 100Hz, 120Hz, 150Hz,
EKX-15SP, EKX-18SP, and ELX118P. The high passes are 24 dB/octave Linkwitz/Riley
crossovers. The 80 Hz, 100 Hz, 120 Hz, and 150 Hz choices are generic high pass settings for
use with other subwoofers. The EKX-15SP, EKX-18SP, and ELX118P settings are specifically
optimized for subwoofers by including delay for best summation.
The default is OFF.
TREBLE Menu
The Treble menu is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter
that is centered on 6 kHz. The range is -12 dB to +6 dB.
The default is zero (0).
MID Menu
The Mid menu is used to adjust the midrange frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a parametric EQ that is
centered on 1.2 kHz. The range is -12 dB to +6 dB.
The default is zero (0).
BASS Menu
The Bass menu is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a parametric EQ filter
that is centered on 80 Hz.
The default is zero (0).
LED Menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON, OFF or LIMIT.
▪ ON – turns the LED on when the power to the loudspeaker is ON. (Default)
▪ OFF – turns the LED off.
▪ LIMIT – turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for two (2) minutes.
Available options for this selection are: ON or OFF.
The default is ON.
BRIGHT Menu
The Bright menu is used to determine the brightness of the LCD. The range is 1 to 10.
The default is five (5).
en 25
Electro-Voice User Manual 2015.02 | 03 | F.01U.308.095
Loading ...
Loading ...
Loading ...