Loading ...
Loading ...
Loading ...
1414
10. SPECIFICATIONS
• Product name: PartyBox 1000
• AC power input: 100-240V ~ 50/60Hz
• Power consumption: 150W
• Standby power consumption:
<2W with BT connecting;
<0.5W without BT connecting
• USB output: 5V 2.1A
• Speaker drivers: 1 x12” Subwoofer + 2 x 7” Mid-range +
1 x Compression driver
• Speaker impedance: Subwoofer 3 ohm / Midrange 4 ohm /
Compression driver 4 ohm
• Total output power: 1100W
• Frequency response: 30Hz -20kHz(-6dB)
• Signal-to-noise (S/N) ratio: 80 dBA
• Wristband battery play time: 6h
• Bluetooth version: 4.2
• Bluetooth prole: A2DP V1.3, AVRCP V1.6
• Bluetooth transmitter frequency range: 2402-2480 MHz
• Bluetooth maximum transmitter power: 15dBm (EIRP)
• Bluetooth transmitter modulation: GFSK, π/4 DQPSK,
8DPSK
• Bluetooth range: Approx. 10m (33 feet)
• USB le system: FAT16, FAT32
• USB le format: .mp3, .wma, .wav
• Air gesture wristband: BLE technology
• Dimensions (W x H x D): 397 x 1050 x 390 mm /
15.6 x 41.3 x 15.4 in
• Net weight: 34.7 kg / 76.5 lbs
9. SETTINGS
9.1 TWS Mode
The two PartyBox 1000 speakers can connect to each other in
TWS mode.
10m (33ft)
1) Press and hold on both speakers simultaneously for 5
seconds, you will hear a tone to indicate speakers are in
pairing mode. Once TWS connection built up, you will hear
another tone.
2) Press L/R button on one speaker to toggle between L channel,
R channel and Stereo, another speaker will change the setting
automatically. By default the rst one connected to your device
will be the primary speaker (L channel), the other one will be
the secondary speaker (R channel).
9.2 Demo Mode
Caution:
– Ensure PartyBox is powered by AC to go into Demo Mode.
– If the AC power unplugged, the PartyBox will power off. If the
AC power is resumed the PartyBox will automatically enter demo
mode.
To enter or to exit demo mode, press and hold and
simultaneously for 5 seconds.
In demo mode, all the input sources are disabled, all buttons but
/
/
/ are disabled.
Note:
– The PartyBox built-in with 3 x 30 seconds music tracks.
Playback
• Press once to start, pause or resume the play (one sample
will be played only for 30 seconds).
• Press once after the pause, to play the next track.
9.3 Standby Mode
The standby mode function can set only when the speaker is not
used for 20 minutes. To exit the standby mode, press or .
Loading ...
Loading ...
Loading ...