Loading ...
Loading ...
Loading ...
not let the ice overflow the ice basket.
CLEANING & USE GUIDANCE
1.
Clean the inner liner, ice collecting tray, water box, ice shovel,
and evaporator frequently. When cleaning, unplug the unit and
remove the ice cubes. Use a diluted solution of water and
vinegar to clean the inside and the outside surfaces of the
ice maker. Do not spray Ice maker with chemicals or diluted
agents, such as acids, gasoline, or oil. Rinse thoroughly before
starting.
2.
Allow enough room around the ice maker for adequate
ventilation. Do not use mechanical devices or other means not
recommended by the manufacturer to accelerate the defrosting
process.
3.
After the machine has been standing idle for a long period of
time, the restart may trigger the air blockage inside the pump
and causes the pump to draw insufficient water, followed by the
flashing of water shortage indicator "ADD WATER." Under such
circumstances, press the power button and start the ice maker
again.
4.
To ensure the cleanness of ice, please change the water at
least once a day. If the ice maker is not used for a long time,
please drain the water and clean it up.
5.
Several reasons can trigger compressor protection which
normally lasts three minutes. These reasons include but not
limited to the shortage of water, the overflow of ice, or power
failure.
6.
Always use fresh water before starting ice production, either at
initial installation or after a long shut-off period.
9
Loading ...
Loading ...
Loading ...