Samsung RS28CB7600QL 36 Inch Freestanding Side by Side Smart Refrigerator with 23 cu. ft. Capacity, SpaceMax Technology, Beverage Center, Dual Ice Maker, Auto Open Door, Internal Water Dispenser, Built In Pitcher, Power Cool, Power Freeze, All-Around Cool

Owners Guide - Page 34

For RS28CB7600QL.

PDF File Manual, 228 pages, Read Online | Download pdf file

RS28CB7600QL photo
Loading ...
Loading ...
Loading ...
Operations
English34
Operations
04 Ice Maker / Filter Reset (3 sec)
Ice Maker
Press Ice Maker to turn the ice maker on or off.
The ice maker has 2 indicators (
/ ) to
indicate its operating status.
When the ice maker operates, the corresponding indicator
(
) turns on.
When the ice maker is turned off, the corresponding indicator (
) turns on.
Filter Reset
After about 6 months (and typically, about 300 gallons (1200 L)
of water), the Filter Reset indicator blinks red for several seconds
when you open the door, reminding you that the lter needs to be
replaced.
When this happens, replace the lter, and then press and hold
Ice
Maker for 3 seconds. The lter lifecycle will be reset and the Filter
Reset indicator turns off.
NOTE
Some regions have relatively large amounts of minerals in
their water. This can reduce the lifecycle of the lter. In these
areas, you will have to replace the water lter more often than
specied above.
If water is not dispensing properly, the water lter is most
likely clogged. Replace the water lter.
05 Door Alarm / Peak Demand Off (3 sec)
Door Alarm
If the door is left open for more than 2 minutes, an alarm will
sound and the alarm indicator will blink. You can toggle the alarm
on and off by pressing Door Alarm. The alarm is enabled by
factory default.
If the door is left open for 5 minutes, interior light (in the fridge,
freezer) will blink for 5 minutes and turn off. It is to alert deaf and
hard of hearing users that a door is open. Note that this function
is normal.
Peak Demand Off
The Peak Demand Off function activates/deactivates Smart Grid.
Press
Door Alarm for 3 seconds to set/clear the Peak Demand Off
function.
When the function is enabled, the Peak Demand indicator (
)
turns on with a chime.
For more information, see the SMART GRID Function (Demand
Response) (applicable models only) section on page 40.
Untitled-2 34 2022-11-29  10:50:57
Loading ...
Loading ...
Loading ...