Loading ...
Loading ...
Loading ...
Crisper Drawers
Crisper drawers keep produce fresh longer. Wrap
produce tightly. Do not wash produce before placing in
crispers. Excess moisture could cause produce to spoil
prematurely. Do not line crispers with paper towels. Paper
towels retain moisture.
Crisper control is located below front shelf trim. Control
adjusts humidity in crisper drawers. Slide control to high for
produce with leaves such as lettuce,spinach or cabbage.
Slide control to low for produce with skins such as
cauliflower, corn or tomatoes.
To remove or clean crisper drawer assembly for 33"
wide units:
1. Remove crisper drawer on handle side of unit.
CAUTION 1
Handle tempered glass shelves carefully to avoid
personal injury or property damage. Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
2. Remove glass crisper top by gently pushing up from
underneath. Tilt one end up and pull out.
3. Lift front of crisper shelf frame and remove.
4. Lift front of remaining crisper assembly and remove
support post from center of refrigerator floor.
5. To avoid interference with door, move remaining
crisper assembly to opposite wall and remove.
Replace crispers and shelves by performing steps
2 through 5 in reverse order.
Note: Be sure to hook shelf frame over notch on top
of support post when replacing shelf frames.
7. Slide crisper glass into place.
To remove or clean crisper drawer assembly for 30"
wide units:
1. Open refrigerator door as wide as possible and
remove crisper drawers.
CAUTION
Handle tempered glass shelves carefully to avoid
personal injury or property damage. Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
2. Remove glass crisper top by gently pushing up from
underneath. Tilt one end up and pull out.
1
3. Raise front of crisper frame free of refrigerator
cabinet rail assembly and pull out of unit.
4. Replace crispers and shelf by performing steps 2
through 3 in reverse order.
5. Slide crisper glass into place.
Meat Drawer
The meat drawer features an adjustable drawer providing
space saving storage under spillproof shelves. The drawer
can be moved from the left to the right side of the
refrigerator compartment to accomodate different storage
needs.
1. Remove drawer by lifting and pulling out. Remove
shelf by lifting from front, releasing hooks from metal
track, then pulling out.
2. Replace shelf by inserting hooks into the metal track
and lowering the front of shelf. Replace drawer by
sliding in.
]2
Loading ...
Loading ...
Loading ...