Loading ...
Loading ...
Loading ...
Figure 1
Figure 2
MAIN FUSE BOX
8
How to Assemble Your Ceiling Fan (continued)
Figure 6
5. Cut off excess lead wire approximately 6 to 9
inches above top of the downrod. Strip insulation
1/2 inch from the end of each lead off wire. (Figure 6)
1. Remove the two screws from the canopy and retain
the screws for “ Installing the Canopy Housing ”
Step 1. (Figure 2)
NOTE:
All set screws must be checked, and retightened
where necessary, before installation.
Figure 3
No
less than
10 ft
2.5 ft min.
from
staircase
or wall
WARNING:
Do NOT
Mount Fan
On Wall
Or Floor!
Floor
Ceiling
How to Hang Your Ceiling Fan
▲
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging. (Figure 1)
▲
WARNING
The fan must be hung with at least 10´ of clearance from
floor to blade and MUST ONLY be hung in a vertical
downward position from ceiling. (Figure 3)
CAUTION
To Reduce the Risk of Personal Injury, this Product Must
be Secured as Described in the Manual.
NOTE:
If you are not sure if the outlet box is grounded,
contact a licensed electrician for advise, as it must be
grounded for safe operation.
Ceiling Canopy
Loading ...
Loading ...
Loading ...