Model: MP0608 / MP0608A
Instruction Manual
3.1Amp Dual USB Charger & Battery Monitor
Specification:
* Input: 12-24V DC
* Output: 5V DC, 3.1Amp
* SAE Quick Release Connector
* 7.5A fuse protected SAE Ring Terminal cable (MP0608)
NOTE:
1- Use fuse protected cable to connect the USB charger with the battery for
safety. ( MP0608 includes the fused SAE Ring Terminal Cable; MP0608A
doesn’t include the cable.)
2- Route the wire away from moving parts, hot engine, exhaust components, or
steering components for safety. Secure all wiring and fuse by zip ties, taps, etc.
3- Connect the SAE connectors and press the center round button to turn on the
USB charger when all parts are installed properly.
MANUFACTURER:
MOTOPOWER INC.
16192 Coastal Hwy, Lewes,
DE 19958, USA
www.motopowers.com
EU IMPORTER:
For product support, please contact us at [email protected].
Our professional customer service team will respond to you soon.
Support:
Warranty:
Register the product online to get 12months warranty.
-www.motopowers.com/pages/warranty
TRANSRITE INDUSTRIES CO., LIMITED
12 AV Roland Corrao, 13700 Marignane
FRANCE 60 852111939
Email:sales@transrite.com
ASIA DISTRIBUTOR:
TRANSRITE INDUSTRIES CO., LIMITED
SUITE 1503, 15/F, Carnival Commercial Building,
18 Java Road, North Point,
Hong Kong
Operation Instruction:
1- Press once to Turn on the USB output - Green LED On
2- Press again to Turn off the USB output - Green LED Off
3- Press twice to Turn on the Battery Monitor function, press again to quit:
a) Pulsing Green: Battery is in good condition (>12.6Volts)
b) Pulsing Yellow: Battery is in medium condition (11.6-12.5Volts)
c) Pulsing Red: Battery is empty (<11.6Volts, need to charge immediately)
*** Battery Low-voltage / Over-discharge Protection ***
During USB charging, when the battery voltage is decreasing under 11.6Volts,
the USB charger built-in circuit will shut off the output and the Green LED will
flash to indicate the low battery condition. It will protect the battery from
over-discharge.
