Model: MP0609 / MP0609A / MP0609AA
Instruction Manual
3.1Amp USB Charger
Specification:
* Input: 12-24V DC
* Output: 5V DC, 3.1Amp
* SAE Quick Release Connector
* 7.5A fuse protected SAE Ring Terminal cable (MP0609A/0609AA)
NOTE:
1- Use fuse protected cable to connect the USB charger with the
battery for safety. ( MP0609A/MP0609AA includes the fused
SAE Ring Terminal Cable; MP0609 doesn’t include the cable.)
2- Route the wire away from moving parts, hot engine, exhaust
components, or steering components for safety. Secure all
wiring and fuse by zip ties, taps, etc.
3- Connect the SAE connectors to turn on the USB charger
when all parts are installed properly. Plug in the cell phones
or GPS for charging on the ride.
4- Disconnect the SAE connectors and keep the cap on after each
use. Do not keep the USB charger connected with battery for
long time, which may cause battery drain and affect the USB
charger life.
DISTRIBUTED BY:
MOTOPOWER INC.
16192 Coastal Hwy, Lewes,
DE 19958, USA
www.motopowers.com
EU IMPORTER:
For any product support or service, please contact us at
[email protected]. Our professional customer
service team will respond to you soon.
Support:
Warranty:
Register your product online to get 12months warranty.
- www.motopowers.com
TRANSRITE INDUSTRIES CO., LIMITED
12 AV Roland Corrao, 13700 Marignane
FRANCE 60 852111939
Email:sales@transrite.com
TRANSRITE INDUSTRIES CO., LIMITED
Unit 39 ST, Olavs Court, City Business
Center, Lower Road, Greater London
SE16 2XB, GB 258 2919 70
UK IMPORTER:
