Loading ...
Loading ...
Loading ...
CONVERTING RANGE FROM NATURAL GAS
TO L.P. (PROPANE) GAS
STEP 3 METHOD B No Oven Thermostat conversion is required.
STEP 4 METHOD A or B Convert Oven
Burner:
The oven burner orifice is located beneath
the inlet to the oven burner at the lower rear
portion of the broiler section. ( See Fig. 7)
Using a 1/2” wrench turn the orifice hood
clockwise until it is snug.
Warning: Do not over-tighten the orifice
hood.
PIN
LP GAS
NATURAL GAS
ORIFICE HOOD
Fig. 7
STEP 6 METHOD A or METHOD B Check Operation:
After the above conversion has been completed, check operation of the top burners and oven burner. Make air
shutter adjustment in oven if necessary (See Page 26 for lighting and burner adjustments.).
5.Once the pilot is lit, locate the pilot adjustment
screw on the lower left hand side of
the oven thermostat control. See Fig. 5
Access the pilot adjustment screw through
the opening behind the oven temperature con-
trol knob. With a straight blade screwdriver ro-
tate the screw till the outer tip of the flame is
just barely reaching the underside of the end of
the flame safety probe. See Fig. 6.
FLAME SAFETY PROBE
OVEN PILOT
23
Fig. 6
Loading ...
Loading ...
Loading ...