Loading ...
Loading ...
Loading ...
347
PO
S AVE THESE INSTRUCTIONS
(347PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 05/21/2020
English
Page 9
SET UP (continued)
Take out the ground cloth and spread it over the cleared area. Then spread out the spa liner over
the ground cloth and point the drain valve towards a suitable draining area.
Spread the ground cloth with the bubbles facing down over the cleared area where you intend
to setup your spa.
Flip up the control base side coverto reveal the air blower ination outlet. Pull out the latch to open
the cover, insert the hose adaptor with hose and reattach the latch to the hose adaptor to secure it
in place .
Unscrew the air valve cap on the spa tub to reveal the stem in the
up position for ination. Insert the other end of the ination hose
into the valve and turn to the right to lock it in position (see
.
Press the
button to turn on the control panel buttons rst. Press
the
button to inate the spa tub wall for 8 to 10 minutes until it
is rm to the touch but not hard .
Do not over inate or use high pressure air
compressor to inate.
Loading ...
Loading ...
Loading ...