Loading ...
Loading ...
Loading ...
347
PO
S AVE THESE INSTRUCTIONS
(347PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 05/21/2020
English
Page 11
SET UP (continued)
The spa tub ination/deation valve incorporates an “air pressure release” function that automatically
releases excess air when the spa tub internal pressure is between 1.5 - 2.5 psi (0.103 - 0.172 bar).
Air pressure release valve.
Colder temperatures at night
cause the spa to seem less
inated.
Air expands in the midday
heat and correct air
pressure is restored.
Air expands in the midday heat.
Air pressure release valve kicks
in and releases excess air.
Ination of spa in the morning.
Unscrew the cap to reveal the stem, push the stem in and turn
90 degree right to secure it in the down position .
Once the deation is completed, push the stem in and turn 90
degree left to return it to the ination position.
Replace the cap back.
To deate the spa tub for storage, see “STORAGE” section.
Pull valve cap out and squeeze the valve at its base until deated.
Close and recess the valve back.
If the spa cover air bladder does not t into the spa tub due to over ination, release some air from
the bladder until it ts.
Loading ...
Loading ...
Loading ...