Loading ...
Loading ...
Loading ...
BEFORE CALLING FOR SERVICE (continued)
Washer will nota_rate Control panel has powered off due to
inacfivffy.
Washer _sunplugged.
VCater supply is turned off.
Controls are not set properly.
Lid _sopen
This is normal. Press the POWER button to turn
the washer on.
Make sure cord is plugged securely into a
working outlet.
Turn both hot and coid faucets fully on,
Make sure the cycle was set correctly, close the
lid and press the START/PAUSE button.
Washer not filling
Circuit breaker/fuse is tripped/blown.
Control needs to be reset.
START/PAUSE was not pressed after a cycle
was set,
E×tremely Jaw water pressure,
"Washer is too cold.
Filter dogged,
Inlet hoses may be k{nked
Energy emciency.
tnsumcient water supply.
The washer Hd is open,
Hot and cold inlet hoses are reversed.
"Water _evel is too low,
on a dedicated branch circuit. The washer will
resume the cycle where it stopped once power
is restored.
Press the POWER button, then re-select the
desired cycle and press the START/PAUSE
bufon.
Press the POWER button then re-select the
Check another faucet in the house to make sure
that household water pressure _sadequate.
Make sure the in:let filters on the _tl valves
are not clogged. Refer to the filter cleaning
instructions.
Check that iniethoses are not kinked or
clogged.
Make sure that both hot and cold water faucets
are turned on oil the way,
Check in_et hose connections. Make sure the hot
cold inlet valve.
29
Loading ...
Loading ...
Loading ...