Loading ...
Loading ...
Loading ...
OPTION BUTTONS
FABRIC SOFTENER
i' Fabric softener is dispensed in the final rinse,
This washer is designed to save rinse water by
L_-_J .
using a let spray rinse system (SMARTRINSE)
in NORMAL and HEAVY DUTY cycles. Press the FABRIC
SOFTENER button to change the final rinse from spray
rinse to regular rinse so that the fabric softener is most
effective.
NOTE: Select the FABRIC SOFTENER o_ion or
EXTRA RINSE option if liquid fabric softener is used
in NORMAL and HEAVY DUTY cycles. Failure to
select one of these options wit greatly reduce the
effectiveness of the softener.
MY CYCLE
M;Y CYCLE allows you to store a cus'_mized
/ " CyMOSewash cycle for future use. ft allows you to _ve
.....................favorite tem_atur_ spin speed, soil level, and
other options for a cycle, a_ then recall them at the touch
of a bu_on.
NOTE: You can only save one cycle at a time. Pressing
and holding the MY CYCLE button will overwrite any
previously saved cycle.
To save a MY CYCLE:
Press _e POV'/ER button turn the washer,
to on
Press the cycle button to select the desired cycle.
Pros the cyde modifier _ons to change _e desired
_tting,
Press _e modifier buttons add the desired
cycle
to
options,
O Press and hold the MY CYCLE button.
To recall a MY CYCLE:
Press the POWER button to turn on the washer.
Pressthe MY CYCLE _atton_ The _ _i_s will
displayed,
O Press the START/PAUSE button to start the cycle,
NOTE: MY CYCLE can be adjusted the same as any
other cycle. Howeve G once any other button is pressed,
the MY CYCLE button LED will turn off indicating that
the smtings are no longer those of your saved cycle.
_ This option provides max 180 mln_es
. ___._ presoak prior to the start of the selected cycle. Use
the SOAK option to presoak
garments to help remove difflcult spats or stains on
fabrics. At the end of the presoak time_ the _lected cyde will
begin with the same water used for the soak.
DELAY WASH
Once you have selected the cycle and
_ Del_y other settings, press this button to delay the
Was5
start of the wash cycle. Each press of the
button increases the delay time by one hour, for up to
19 hours. Once the desired detoy time is set, press the
START/PAUSE button to start the delay time,
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically shut
off after four minutes.
RINSE & SPIN
_lnm Select this option to rinse and spin o load
L...._..sp_"] separately from o regular cycle, This can be
helpful in preventing fresh stains from setting in
fabrics, You can change the spin speed by pressing the
SPIN SPEED button
Press the START/PAUSE button to turn on the
washeir_
Press the RINSE & SPIN button.
Press the SPIN SPEED button to select the desired
spin speed. Selecting NO SPIN is not allowed.
@ Press the START/PAUSE button,
CONTROL LOCK
U_ _is optionto disable _e control_ Thisfea-
ture con prevent childrenfrom changing cycles or
operating _e machine. Once _e cent_teli_k iS
set, it must be deactivated before any controls, except the
PO;WERbutton, can be used. Once the washer has shutoff,
the POWER bL,ctonwill allow the machine to be _rned ON,
but the controls will still be locked, VChen_e controls are
locked, [L will display alternately wffh _e estimated time
remaining. Pressand ho_d _e CONTROL LOCK button for
three seconds to adlvate or deactivate Control Lock.
22
SPECIAL DRAIN FEATURE
This washer is equipped with a specia_ feature that is
designed to make your washer as safe as possible.
If the washer is paused or shut off while there is still water
in the tub, the water will drain after several minutes, This
helpskeep,childrensafeby reducingthe possibilityof
con be restarted
tf no action is taken, the dr- error code will display and
the water willdrain from the tub. Once the washer begins
draining the water, the controls ore disabled and the
drain process cannot be interrupted. Once the water is
completely drained, the washer will shut off.
NOTE: In the unlikely event that the washer experiences
o problem that causes an error code to be displayed,the
washer will still drain after several minutes, Howeve5 only
the original error code wH_be displayed,
Loading ...
Loading ...
Loading ...