Loading ...
Loading ...
Loading ...
Purification
Note: The following function is only applicable to the DC12DEPUR model.
WARNING: The DC12DEPUR model contains a UV-C lamp. Please ensure to read the
maintanence instructions before opening the appliance. If the UV-C lamp has an error,
please contact a service professional to fix. The appliance must be disconnected from
the power supply before replacing the UV-C lamp. Before opening panels bearing the
Ultraviolet Radiation hazard symbol for conducting user maintanence as below, it is
recommended to disconnect the power.
WARNING: DO NOT operate the UV-C lamp outside of the appliance. Unintended use
of the appliance or damage to the housing may result in the escape of dangerous
UV-C radiation. UV-C radiation, even in small doses, may cause harm to the eyes and
skin. Appliances that are damaged in any way should not be operated. UV-C barriers
containing the Ultraviolet radiation hazard symbol should not be removed. Do not stare
directly at the light source.
• Hold the MODE button for 3 seconds to activate the PURIFICATION function. The
'UV' symbol will display.
• Hold the MODE button for a further 3 seconds to switch this function off. The 'UV'
symbol will dissapear from the display.
This function uses Ultra Violet (UV) Light disinfection to purify and remove microbiological
contaminents from the humidity in the air.
17
Loading ...
Loading ...
Loading ...