Loading ...
Loading ...
Loading ...
en operation
34
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: End.
13.8 Soaking laundry
Note:No additional detergent is re-
quired. The washing solution is then
used for washing.
1. Start the programme.
2. To pause the programme, after ap-
prox. 10 minutes, press .
3. To resume the programme, after
the desired soaking time, press
.
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1. Press .
The appliance pauses.
Note:If you want to add laundry,
follow the instructions on the dis-
play.
→"Display", Page23
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press .
13.10 Cancelling the pro-
gramme
1. Press .
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→"Programmes", Page27
3. Remove the laundry.
→"Unloading the laundry",
Page34
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→"Buttons", Page25
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
1. Set the Spin programme or a pro-
gramme for draining the water.
→"Programmes", Page27
2. Press .
13.12 Unloading the laundry
1. Open the door.
2. Remove the laundry from the
drum.
13.13 Put the appliance into
standby mode
1. Press .
Loading ...
Loading ...
Loading ...