Loading ...
Loading ...
Loading ...
8
ENG
FAILURE DISPLAY AND INSPECTION
TECHNICAL SPECIFICATION
If an abnormality comes up, the induction hob will enter the protective state automatically and display
corresponding protective codes:
Error Message Possible Cause What to do
No pot or pot not suitable; Replace the pot;
E
Water or pot on the glass over the control Clean the user interface
F1E
The connection between the display board
and the left mainboard is fail (the cooking
zone which indicator showing “E”)
1. Connection cable not correctly plugged
or defective;
2. Replace the Mainboard.
F3E
Coil temperature sensor failure. (the cooking
zone which indicator showing “E”)
Replace the coil sensor
F4E
Mainboard temperature sensor failure. (the
cooking zone which indicator showing “E”)
Replace the mainboard
E1E
Temperature sensor of the ceramic glass
plate is high
Please restart after the induction hob cools
down.
E2 E Temperature sensor of the IGBT is high
Please restart after the induction hob cools
down.
E3 E Abnormal supply voltage(too high)
Please inspect whether power supply is normal;
Power on after the power supply is normal.
E4 E Abnormal supply voltage (too low)
Please inspect whether power supply is normal;
Power on after the power supply is normal.
E5 E
Temperature sensor failure(the cooking zone
which
indicator showing “E”)
Connection cable not correctly plugged or
assemble defective;
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob and
please contact the supplier.
Weight and Dimensions are approximate. Because we continually strive to improve our products we may change
specifications and designs without prior notice.
Cooking Hob HI6300TB
Cooking Zones 3 Zones
Supply Voltage 220-240V~
Installed Electric Power 6500W (230V)
Product Size LxWxH (mm) 590x520x60
Building-in Dimensions AxB (mm) 565x495
Loading ...
Loading ...
Loading ...