Loading ...
Loading ...
Loading ...
11
ENG
Cautions
OR
• Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
• Adjust the bracket position to suit for different work surface’s thickness.
1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your
service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer,
3. washing machine or clothes dryer, as the humidity may damage the hob electronics
4. The induction hotplate shall be installed such that better heat radiation can be ensured to enhance its
reliability.
5. The wall and induced heating zone above the table surface shall withstand heat.
6. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching devices, as
they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its temperature will
not exceed 75˚C at any point.
Connecting the hob to the mains power supply
Loading ...
Loading ...
Loading ...