Loading ...
Loading ...
Loading ...
Network Camera User Manual
75
4. Click Save.
9.13 Set RS-485
RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data
between the device and the computer or terminal when the communication distance is too long.
Before You Start
Connect the device and computer or termial with RS-485 cable.
Steps
1. Go to Configuration → System → System Settings → RS-485.
2. Set the RS-485 parameters.
Note
You should keep the parameters of the device and the computer or terminal all the same.
3. Click Save.
9.14 Set RS-232
RS-232 can be used to debug device or access peripheral device. RS-232 can realize
communication between the device and computer or terminal when the communication distance
is short.
Before You Start
Connect the device to computer or terminal with RS-232 cable.
Steps
1. Go to Configuration → System → System Settings → RS-232.
2. Set RS-232 parameters to match the device with computer or terminal.
3. Click Save.
9.15 Power Consumption Mode
It is used to switch the power consumption when the device is working.
Note
The function is only supported by certain camera models.
Go to Configuration → System → System Settings → Power Consumption Mode, select the
desired power consumption mode.
Full Consumption Mode
Loading ...
Loading ...
Loading ...