XtremepowerUS 75117-1 OWNER’S MANUAL AND SAFETY INSTRUCTIONS

Loading ...

PUMP LOCATION

INSTALLATION

Locate the system below the pool water line, for best pump performance. Install pump on a rm, level base

or pad to meet all local and national codes. The eld supplied base or pad must be level. Though the pump

is designed for outdoor use, it is strongly advised to protect the electrical components from the weather.

Select a well-drained area, one that will not ood when it rains. Pump motors require free circulation of air

for cooling. Do not install pump in a damp or non-ventilated location.

POOL

RETURN

DRAIN

VALVE

OUTLET

VALVE

PUMP

WITH

STRAINER

POOL

SUCTION

BALL

VALVE

WATER LINE

1. Pump Mounting

Install pump on a rm, level base or pad to meet all local and national codes. Fasten pump to base or

pad with screws or bolts to further reduce vibration and stress on pipe or hose joints. The base MUST be

solid, level, rigid, and vibration free.

Pump mount must:

 Allow pump inlet height to be as close to water level as possible.

 Allow use of short, direct suction pipe (to reduce friction losses).

 Allow for gate valves in suction and discharge piping.

 Be protected from excess moisture and ooding.

 Allow adequate access for servicing pump and piping.

PIPE SIZING CHART

NOTE: It is recommended that a minimum length of piping, equivalent to 10 pipe diameters, be used

between the pump suction inlet and any plumbing ttings.

Loading ...

XtremepowerUS 75117-1 3/4 HP Above Ground Swimming Pool Pump