Loading ...
Loading ...
Loading ...
Special Drying Instruction
Save and refer to Garment Manufacturer's Drying Instructions
Load Special Instructions
Permanent Press Do not overload dryer; clothes should tumble freely. Remove as soon as dryer
stops; place clothes on hangers to minimize wrinkling.
Polyester Knits ] Do not overload dlTer; clothes should tunable freely. Remove as soon as duer
I
stops; place clothes on hangers to minimize wrinkling.
Baby Clothes Sturdy:
Diapers, Nightgowns, Shirts,
Pads, Sheets, Receiving
Blankets, Coveralls.
Baby Clothes Delicate
Important: If children's sleepwear is made of Modacrylic, dry only on Low
Heat/Timed Cycle or Delicate Cycle. High Heat or excessive drying can reduce
the flame retardancy of these fabrics. Check malmfacturer's drying instructions.
See above instructions.
Blankets Wool, Part Wool,
Cotton
Plastics_prons, bibs,
tablecloths, chair covers,
bowl covers, curtains.
I Follow manufacturer's instructions. Do only one blanket at a time. Partially du
in your duer for no longer than 20 minutes. Remove while still damp and finish
duing on flat surface.
I Use Fluff(No Heat)
Care and Cleaning
USER MAINTENANCE
INSTRUCTIONS
• To keep your dryer looking
good, wipe cabinet with a damp
cloth. Occasionally wash it with
mild soap and water and then apply
a light coat of appliance polish to
help preserve the finish.
• Clean the lint falter before every
load. See page 6.
• Keep area around and underneath
your appliance free from the
accumulation of combustible
materials, such as lint, paper,
rags, chemicals, etc.
• Keep the floor around your
appliances clean and dry to reduce
the possibility of slipping.
• Do not store dryer where it will
be exposed to the weather.
• If your dryer is exhausted to the
outside, inspect and clean &Ter
exhaust ducting at least once a year.
How to reduce the possibility
of a fire hazard, if your dryer is
not exhausted to the outside:
A clothes dryer produces
combustible lint. When the dryer
is not exhausted to the outside, this
lint is more apt to accumulate in
and near the dryer, which could
create a fire hazard.
It is imperative to keep the laundry
area (around the washer and dryer)
clean and flee from the accumulation
of lint, paper, rags, etc. Clean this
area regularly.
Also inspect the &Ter's blower
compartment at least once a year
and remove accumulated lint as
follows:
1. Unplug the dryer•
2. Remove the access panel.
3. Clean out any lint that may have
accumulated. Wipe or vacuum,
being careflfl not to disturb any
electrical or mechanical connections.
Blower Compartment Access Panel
With d_er unplugged, remove two
Phillips-head screws at bottom of
blower compartment access panel.
Tip bottom of panel out until clips
slip out. To replace, slip top of
panel up until clips are secured.
Press bottom ofpanel in and
replace screws.
Loading ...
Loading ...
Loading ...