Loading ...
Loading ...
Loading ...
Control Panel Setting
Important Notice
1. Power Key 2. Mode Selection Key . Down Key
. Up Key .Fan Speed Selection Key . Timer Key
I. Operating instructions:
LED Control Panel is as follows:
Fig.5 Fig.6
The length of the exhaust hose shall be 280mm-1500mm/ 11”-59”, and this
length is based on the specifications of the air conditioner. Do not use
extension tubes or replace it with other different hoses, or this may cause a
malfunction. Exhaust host must be not blocked; otherwise it may cause
overheating.
TIMER SPEED
UP DOWN MODE
POWER
1: When the machine is powered on for the first time, the buzzer will play
power-on music, and then the machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case
of power on, press the key to turn off the machine; in the case of power off,
press the key to turn on the machine.
3: Mode Selection Key: In the case of power on, press the key to switch
4: Up Key and Down Key: press the two keys to change the setting
temperature or setting time, operate as follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5: Wind Speed Selection Key:
In cooling and fan mode, press the key to select high,low wind speed
operation. But limited by anti-cold conditions, under certain conditions, it
may not run according to the set wind speed.
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly
choose low wind speed operation.
6: Timer Key:
In the case of power on, press the key to close timer; in the case of power
off, press the key to open timer.
Press the key, when the timer symbol flashes, press up and down key to
select the required timer value.
Timer values can be set in 1-24 hours and the timer value is adjusted up or
down by one hour.
7: Sleep Mode:
In the cooling mode, press the UP and Fan Key to turn on the sleep
mode,then the unit will work quietly in energy-saving mode.
Note:
1. Do not turn on the sleep mode in the Dehumidifying or Fan mode!
2. The waterfull lamp will turn on and buzzer will alarm for several second,
the compressor will stop to work when the inner unit chassis water is full.
08 09
Loading ...
Loading ...
Loading ...