COSTWAY FP10343US-WH 6,000 BTU Portable Air Conditioner Cools 280 Sq. Ft.

Use and Care Manual - Page 16

For FP10343US-WH. Also, The document are for others COSTWAY models: FP10343CA-WH

PDF File Manual, 32 pages, Read Online | Download pdf file

FP10343US-WH photo
Loading ...
Loading ...
Loading ...
Unit Storage:
1: Unscrew the drainage cover, unplug the water plug, and discharge the
water in the water pan into other water containers or directly tilt the body to
discharge the water into other containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain
this state until the drainage pipe becomes dry, so as to keep the inside of the
body in a dry state and prevent it from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord
around the wrapping post; install the water plug and the drainage cover.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioner with a plastic bag. Put the air conditioner in a
dry place, keep it out of the reach of children, and take dust control
measures.
6: Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine
components properly.
Troubleshooting
Do not repair or disassemble the air conditioner by yourself. Unqualified
repair will cause damage to users or their properties.
Problems Reasons Solutions
The air
conditioner
does not
work.
There is no electricity.
Discharge the water inside.
Turn it on after connecting it to a
socket with electricity.
Recommend to use the
machine in at the
temperature of 7-35
O
C
(44-95
O
F).
The overflow indicator
displays "FL".
The ambient temperature
is too low or too high
The cooling
effect is not
good
Big Noise
Compressor
does not work.
Change the set
temperature.
In cooling mode, the room
temperature is lower than the
set temperature; in heating
mode, the room temperature is
higher than the set temperature.
Doors or windows are open;
there are a lot of people; or in
cooling mode, there are other
sources of heat.
The air conditioner is not placed
on a flat surface.
Overheat protection starts.
Put the air conditioner
on a flat and hard place
(to reduce noise).
Wait for 3 minutes until the
temperature is lowered, and
then restart the machine.
Close doors and
windows,
and add new air
conditioner.
In dehumidification mode, the
ambient temperature is low.
There is direct sunlight.
The filter screen is dirty.
Clean or replace the
filter screen.
Clear obstructions.
The air inlet or outlet is
blocked.
Pull the Curtain.
The machine is placed in
a room with an ambient
temperature of greater
than 17
O
C (62
O
F).
14 15
Loading ...
Loading ...
Loading ...