Loading ...
Loading ...
Loading ...
7 Maintenance
21
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk�
If the wrong cleaning agent is used, the machine could be
damaged and/or traces could be left behind in the water�
T
Use only original JURA maintenance products�
E JURA milk system cleaner is available from specialised
dealers�
E Use the container supplied for milk system cleaning�
T
Press the f button�
T
Press the c button�
T
Press the ‘Clean the milk system’ button�
T
Press the ‘Start’ button�
‘Milk system cleaner’
T
Remove the milk pipe from the milk container or milk cooler�
T
Pour one dosing unit of milk system cleaner into the container
for milk system cleaning�
T
Then fill with warm water up to the upper mark.
T
Place the container under the fine foam frother�
T
Connect the milk pipe to the container�
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector�
T
Press the ‘Next’ button�
As soon as the machine has heated up, ‘Open switch’ appears�
T
Turn the switch to thex position�
The fine foam frother and the milk pipe are cleaned�
‘Close switch’
T
Turn the switch to the °position�
‘Fresh water’
T
Rinse the container thoroughly and fill the front part with fresh
water up to the upper mark.
T
Place the container under the fine foam frother and reconnect
the milk pipe to the container�
T
Press the ‘Next’ button�
‘Open switch’
Cleaning the fine foam
frother
CAUTION
6
Loading ...
Loading ...
Loading ...