Sencor SLE 43FS602TCS SMART Full HD LED television User Manual

SLE 43FS602TCS

EN  USER’S MANUAL LED TV

2 EN

Revision 10/2022

Contents

PLEASE, READ THESE INSTRUCTIONS BEFORE STARTING TO OPERATE THE

TELEVISION. STORE IT FOR LATER REFERENCE. NOTE DOWN THE MODEL NUMBER

AND THE SERIAL NUMBER OF THE TV SET. LOOK AT THE LABEL ON THE BACK

COVER AND PASS THE INFORMATION PROVIDED THERE TO YOUR DEALER IN CASE

THAT YOU WOULD NEED SERVICING.

Contents

1. Important safety instructions ..................................................................................................................3

2. Assembling the stand .............................................................................................................................10

3. Device .......................................................................................................................................................... 11

3.1. Buttons on the TV ...................................................................................................................................... 11

3.2. Connecting the TV connectors ................................................................................................................11

4. Remote controller .................................................................................................................................... 12

5. Basic controls ........................................................................................................................................... 14

5.1. First start ......................................................................................................................................................14

5.2. Source selection (SOURCE), movement and menu options ..........................................................14

5.3. Quick options ..............................................................................................................................................14

5.4. Smart ............................................................................................................................................................14

5.5. Channel List ............................................................................................................................................... 15

6. Other menus .............................................................................................................................................16

6.1. Picture ......................................................................................................................................................... 16

6.2. Aspect Ratio (Aspect Ratio) ................................................................................................................... 16

6.3. Network ....................................................................................................................................................... 16

6.4. Advanced Settings ....................................................................................................................................17

6.5. Sound ...........................................................................................................................................................17

6.6. More settings ..............................................................................................................................................17

6.7. About TV......................................................................................................................................................21

7. Media ......................................................................................................................................................... 22

7.1. USB .............................................................................................................................................................22

8. EPG ............................................................................................................................................................ 23

9. REC ............................................................................................................................................................ 24

10. Troubleshooting ....................................................................................................................................... 25

11. Technical speciﬁcations .........................................................................................................................28

11.1. Product Information Sheet .................................................................................................................... 29

EN 3

Important safety instructions

1. Important safety instructions

To be able to use this product properly, read this user's manual carefully and keep it

for future reference. If you plan to give (sell) this device to athird person, include all

documentation, including this manual, with the transaction.

The lightning symbol

inside atriangle indicates

the device has dangerous

voltage that may cause

electric shock.

The exclamation point

symbol inside an isosceles

triangle indicates important

operation and repair

instructions in the included

device documentation.

ATTENTION

RISK OF ELECTRIC SHOCK – DO

NOT OPEN!

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE THE COVER (OR BACK SIDE).

THERE ARE NO PARTS INSIDE WHICH COULD

BE REPAIRED BY THE USER. FOR REPAIRS AND

SERVICE, CONTACT AN AUTHORIZED SERVICE

CENTRE.

General safety instructions

• Please read this manual carefully before using the device. Follow this manual and

the instructions inside.

• Heed all warnings.

• Follow all instructions.

• Use only the attachments and accessories speciﬁed by the manufacturer.

• OPEN FLAMES, FOR EXAMPLE ABURNING CANDLE, SHALL NOT BE PLACED

ON THE DEVICE. DO NOT PLACE HOT OBJECTS OR OBJECTS WITH AN OPEN

FIRE ON THE DEVICE, FOR EXAMPLE CANDLES OR NIGHT LAMPS. HIGH

TEMPERATURES MAY MELT PLASTIC COMPONENTS AND CAUSE FIRE.

• Use the device in temperate climate.

• The manufacturer and vendor of the device are in not in any way liable for any direct

or indirect damages caused by not following the instructions for installation, setup,

operation, maintenance and cleaning of the device mentioned in this manual.

• Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.

• Prior to granting children consent to use the device, they shall become familiar with

the proper and safe use of the player, corresponding to their age. If the device has

aheadphone jack, do not use headphones set to maximum volume. Risk of hearing

damage or loss.

Installation, control

• Install the device according to the instructions in the manual.

• Leave free space around the device, it is necessary for proper air circulation. It helps to

dissipate the heat generated by the operation of the device. By covering the air vents

of the cabinet, you risk overheating and damage of the device. You must ensure that

the air circulation will not be prevented by covering the air vents with e.g.newspaper,

tablecloth, curtain, etc. Follow the installation instructions in the manual.

4 EN

Revision 10/2022

Important safety instructions

• This device shall not be kept in aclosed area, such as alibrary or shelf, provided

sufﬁcient ventilation cannot be provided or the manufacturer's instructions cannot

be followed.

• Do not place any objects into the air vents or any other holes. Risk of touching

components with dangerous voltage or shorting parts that could cause ﬁre or electric

shock. Do not pour any liquids into the device. Do not install the device in direct

sunlight, or close to heat sources, like radiators, heat exchangers, stoves or other

appliances (including ampliﬁers) producing heat. High temperatures shorten the life of

the electronic components of the device signiﬁcantly. Do not use and do not leave the

device near an open ﬁre.

• The device must not be exposed to dripping or running water and you must

not place upon it objects ﬁlled with liquid, e.g. vases. Protect the device against

becoming wet, sprayed on or poured on by any liquid, do not leave or install the

device outdoors. Do not use the device outdoors. You risk electric shock or ﬁre by not

adhering to these instructions.

• Do not use the device close to water.

• Handle the glass panels and cover of the device with care. The glass screen can

break on impact and cause serious injury.

• Make sure the power cord is not stepped on or compressed, especially near the plug

and point leading from the device or adapter. The power plug (adapter) is used to

disconnect the system and must be easy to access.

• Do not use adevice with adamaged power cord or plug. If the power cord or plug is

damaged, turn off the device, disconnect it from the power supply and contact your

authorized repair shop. Only aprofessional can replace adamaged power cord or plug.

Under no circumstances should you attempt to replace the power cord or plug yourself.

• Do not attempt to bypass the safety function of the polarized plug. If the plug cannot

be plugged into your socket, refer to an electrician to replace your obsolete socket.

Before plugging the device into the socket make sure the voltage in your socket

corresponds with the voltage on the label of the device or power adapter. If you are

not sure of the type of power source you have in your home, refer to your vendor or

local power company.

• Before switching, make sure that all network connections are made properly and in

accordance with the manufacturer's instructions. Switch the device off and unplug it

from the socket before plugging in or changing the connection of the device.

• Remember to always unplug the plug (adapter) from the socket before unplugging

the power cord.

• Plug the power cord into an independent socket. Do not overload wall sockets using

extension cords or uniﬁed sockets. Risk of electric shock.

• Hold the power cord by the plug and not by the cable when pulling out from the socket.

• Disconnect the power cord from the power outlet during thunderstorms, or when not

in use for alonger period of time. Avoid carrying the device from acool environment

into awarm environment or vice versa, or operating the device in amoist

environment. Air moisture may condense in some areas within the device case and

may cause the device to become temporarily inoperable.

EN 5

Important safety instructions

• In this case, leave the device in awarm and well-ventilated area and leave for

1–2hours until the moisture evaporates. The device can be normally used again.

Be especially cautious when using the device for the ﬁrst time during acool season

immediately after purchasing. Do not place the device on an unstable cart, stand,

console or table. The device can fall and cause serious injury to children or adults or

seriously damage the device and other objects. Only carts, stands or tables deﬁned

by the manufacturer or sold with the device shall be used. Any assembly work with

the device shall be carried out according to the manufacturer's instructions and shall

use assembly accessories recommended by the manufacturer.

• Do not lean against the device, do not lean over or use the device as astep. Avoid

quick movements. Make sure children do not play with the machine.

• Be careful when moving the device when placed on acart. Suddenly

stopping, using excessive force and uneven surfaces may cause the cart

holding the device to tip over.

• Under no circumstances are the manufacturer or vendor liable for any

direct or indirect damage caused by the failure to observe the instructions for

installation, conﬁguration, operation, treatment and cleaning of this device included

within this manual.

• Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.

Do not expose the device to extreme temperatures or humidity.

Note:

If the device is powered by an adapter, only use the AC adapter and power cord

included with the device. Do not use defective sockets. Make sure the cord is properly

plugged into the socket. If the cord is loose, an electric arc can cause ﬁre. Refer to

aqualiﬁed electrician to replace sockets.

Note:

Plug the device into aproperly grounded sockets with protective grounding pin only.

Note:

If you plan to mount the device to awall or ceiling, follow the instructions of the

manufacturer and the user's manual for the given system.

Repairs and maintenance

• To avoid risks of electric shock or ﬁre, do not remove the device from the case – the

case does not contain components that the user could repair or adjust without the

necessary equipment and qualiﬁcation. Refer to aprofessional service centre if your

device requires service.

6 EN

Revision 10/2022

Important safety instructions

• In the event of any unusual occurrences during the use of the device, e.g. smelling

the characteristic smell of burning insulation or even seeing asmoke, turn the device

off immediately, disconnect the power supply and wait with continuing use of the

device until you learn the result of its inspection by the service personnel.

• Leave all service to qualiﬁed service personnel. Service is necessary when the device is

damaged in any way, for example in case of damage to the power cord, spilling liquid

on the device, intrusion of foreign objects into the device, when the device is exposed

to rain or moisture, if the device does not function in the usual manner or if it fell.

• When repairing or replacing acomponent of the device, make sure the repair

technician used spare parts deﬁned by the manufacturer to ensure the replaced

components have the same features as the original. Unauthorized replacements can

cause ﬁre, electric shock or other risks.

• Prior to cleaning, moving or other maintenance work, unplug the cord (adapter) from

the socket.

• Clean the device with adry cloth only. Do not use gasoline, thinner or other solvents

or abrasives, scouring pads, or sponges with scouring pads to clean the device.

Note:

Do not throw the device into your common household waste. Respect laws and

regulations when disposing of the machine.

Remote controller and battery

• Do not expose the remote controller or battery to direct sunlight, or close to heat

sources, like radiators, heat exchangers, stoves or other appliances (including

ampliﬁers) producing heat. Do not use and do not leave the device near an open ﬁre.

Make sure the sensor is not exposed to intense light (e.g. sunlight) or ﬂuorescent tube

light, which could lower the efﬁciency and reliability of the remote controller.

• The remote controller or battery must not be exposed to dripping or running water

and objects ﬁlled with liquid, e.g. vases, shall not be placed on the device. Protect the

remote controller against becoming wet, sprayed or poured on by any liquid. Do not

use outdoors. Failure to respect these instructions can lead to the remote controller or

battery becoming damaged.

• Do not use the device close to water.

• The impact the battery disposal has on the environment shall be monitored carefully.

• Using the batteries incorrectly can result in leakage and corrosion. Follow the

following instructions to ensure proper remote control operation:

– Do not insert the batteries in the wrong direction.

– Do not charge, heat, open or short the batteries.

– Do not throw batteries into aﬁre.

– Do not leave dead batteries in the remote controller.

– Do not combine various types of batteries or old and new batteries.

– If you do not use the remote controller for alonger period of time, remove the

batteries to prevent damaging the remote controller by the batteries leaking out.

EN 7

Important safety instructions

– If the remote controller does not work correctly or its range decreases, replace all

batteries with new ones.

– If there is an electrolyte leakage from the batteries, have the remote control

serviced by an authorized technician.

NOTICE:

To prevent risk of ﬁre or electric shock, do not expose the device to rain or moisture.

NOTICE:

The batteries must not be exposed to excessive heat, for example sunlight, ﬁre, etc.

This symbol indicates the device has double insulation between dangerous

voltage from the network and user-accessible parts. Replace parts with identical

spare parts only.

8 EN

Revision 10/2022

Important safety instructions

• Do not leave astatic image on the LCD panel

for more than 2 hours. This may result in

adamaged panel.

• This is typical for liquid crystal displays and

does not indicate any problems. LCD screens are

made using precision technology to provide even

the ﬁnest image details. Several defective pixels

can appear on the screen from time to time, indicated as red, blue, green or black

dots (up to 0.001% of the total pixel count of the screen). This does not affect the

characteristics and the effectiveness of your TV set.

Notes on the USB connector:

• USB memory devices require being connected directly into the device. To prevent

afailing or interrupting data transfer, do not use USB extension cable. Electrostatic

discharge can cause the device to not function. In this case, the user must restart

the device.

• Before using aUSB memory device, test that it communicates with the device and

its read and write speed.

• For maximum reading speed, we recommend to keep the disc space defragmented.

Use ﬁle system FAT32, single partition, no protection.

• If the reading/writing of the memory device is not smooth, it can lead to undesirable

effects, such as interruption of the image (blocky image) or failure of whole frames,

audio malfunctions, and in extreme cases, stopping of the operation. Unexpected

behaviour of the connected storage device, or the presence of viruses and other

malicious software can cause the device to stop the functioning with the need to

restart it.

• The USB connector is astandard type and cannot power aUSB device with ahigh

power consumption (e.g. hard drives). Use adevice with its own power and power

them with their own power supply.

• The device was designed with respect to maximum compatibility with memory

devices. Considering the variety of devices on the market, we cannot guarantee

compatibility with every USB device available. Should you run into any issues, try

formatting the memory device directly in the device. Should problems persist, use

another memory device.

Due to wide range of the USB devices on the market, it is not possible to ensure

compatibility of the device with all types of USB devices.

EN 9

Important safety instructions

Serial number

The device's serial number is aunique number that unambiguously identiﬁes your device.

Mark down the serial number of your device below along with additional information

important for the unambiguous identiﬁcation of your device.

Serial number: _____________________________________________________

Date of purchase: ___________________________________________________

Notes:

1. The graphics in this manual is informative.

2. The menu on your TV screen may be slightly different from the illustrations in

this manual.

3. The information in the document are subject to change without notice. The

manufacturer accepts no liability for damages incurred directly or indirectly from

errors, incompleteness or discrepancies between the instruction manual and the

product described.

10 EN

Revision 10/2022

Assembling the stand

2. Assembling the stand

Before attaching /removing the stand, make sure the TV is turned off and plug is

disconnected from the wall outlet.

Before performing the work, put underneath the LED TV set some soft material

(e.g.blanket). This will prevent damage to it. Ensure aproper attachment of the supports

so that the TV set is stable.

Place the assembled TV set on aﬁrm and ﬂat surface.

Instruction for assembling the stand

EN 11

Device

3. Device

3.1. Buttons on the TV

Note:

The location and names of the function buttons and power button on the TV may vary

according to TV model.

button

Turns the TV on or standby.

1. Turn on the TV.

2. The TV is on, press it to display Button menu.

3. In the Button menu, short press it to select the menu, long press (more than

4 sec, less than 6 sec) it to conﬁrm the selection.

4. Press longer than 6 sec does Power Off of TV

3.2. Connecting the TV connectors

1. USB: connection of a USB ﬂash unit for playing supported

multimedia content

2. RJ45: connect the internet

3./4. RF IN: connection to the antenna or cable television system

5. S/PDIF: connect the coaxial output

6. HDMI1: connection of device with a HDMI output to the

HDMI1 connector

7. HDMI2: connection of device with a HDMI output to the

HDMI2 connector

8. AV IN: AV input

9. EARPHONE OUT: earphone output

10. Cl: Cl input

12 EN

Revision 10/2022

Remote controller

4. Remote controller

LISTFAV

: Turns the TV on/off the standby mode.

: Press to mute the sound. Resume it by

pressing again or by pressing the VOL + button.

Number pad 0-9: Press button 0-9 directly to

select a TV channel when watching television.

Select the page number in the teletext mode, etc.

FAV: In the TV mode you enter the Favourites

menu or you exit it.

: Access YouTube.

+/-

: Press to increase or lower the volume.

P / : Press to switch to individual channels.

: Access to SMART interface.

TV: Direct input selection of digital TV.

: Press to select the desired input.

USB: Press to enter USB mode.

: Displays the TV’s main menu in the TV mode.

INFO: Button to display information.

EPG: Press to display the electronic

programme guide.

: Displays the options menu of selected

functions (OPTIONS).

: TV Home Page.

v/V/b/B/OK: Used for navigation in the

menu on the screen and set the TV set

according to your preferences.

: Return one step back.

EXIT: Function to exit menu or the screen.

NETFLIX: Enter the NETFLIX page.

Colour buttons: Match various functions in the

menu or in the teletext.

TEXT: Turn teletext on or off.

Note: the teletext function is optional and

the availability of buttons depends on the

model. Teletext information depends fully

on the channel provider.

LANG:

Selection of the accompanying audio, if available.

Sound mode selection.

SUBT.: Button to display/hide subtitles on the

bottom part of the screen if available.

LIST: View the list of programs according to the

set options.

ZOOM: Press to change the display size.

m: Fast rewinding.

EN 13

Remote controller

M: Fast forwarding.

?b: Jump to previous track.

B?: Skip to next track.

•

: Press to record (only in the DTV mode).

B / X: Play/Pause or start recording with time shift in media mode.

x: Stop recording/play.

Note:

Remove the battery during storage or if you do not use the device for a long time.

To control your device with a remote controller, point it at the device and then press

the desired function. The maximum range of the remote control is about 5 meters with

a deviation of up to +/- 30 degrees from the perpendicular direction to the receiving

remote sensor on the front of the device. The falling battery capacity decreases

gradually the range of the remote controller. When you use the remote controller,

there can not be any ﬁxed obstacles between the remote controller and the device.

During a standard use, the battery life in the remote controller is about 1 year. If there

is a signiﬁcant reduction in the effective range of the remote controller, replace both

batteries in the controller. If you are not going to use the controller for a long time, take

out both batteries – thus preventing a possible damage from battery leakage.

Prevent entry of strong light (e.g. sunlight or strong light from ﬂuorescent or energy-

saving sources) that may limit the efﬁciency and reliability of infrared remote controller.

Other selections

Selection NETFLIX/YouTube offers an access to installed apps. To use the YouTube service

it is advisable to log in, to use the NETFLIX service it is necessary to log in. You can ﬁnd the

14 EN

Revision 10/2022

Basic controls

5. Basic controls

5.1. First start

Guide

The ﬁrst time you turn on the TV, the guide helps you with the setup.

With the guide, select the appropriate menu language, country, Internet connection, home

use (recommended) or demo mode and source selection. When you ﬁnish the guide and

select a broadcast source, you need to search the source for the available channels.

5.2. Source selection (SOURCE), movement and menu options

Press SMART, or to select the desired source or setting using the v/V/b/Bbuttons

and press OK to select it.

Move within the item using the buttons v/V and conﬁrm by pressing OK.

To return to the previous entry, press the .

To ﬁnish the setting press EXIT. Important items can be accessed directly, while advanced

and more detailed settings can be accessed in the item on the far right - More Settings .

Note:

Depending on the current broadcast situation, on the connected devices and on the

selected source, some options may be inactive or not appearing at all.

5.3. Quick options

After pressing the button button, some useful options are available (may vary

depending on the software used):

Tuner mode (selection between terrestrial, cable and satellite reception), Programme

information, Subtitles (On/Off), Subtitle language (by broadcast), Audio language (by

broadcast), General interface (menu of the inserted CAM module), Channel information

(strength, quality, etc.), Channel installation (new tuning).

5.4. Smart

Wireless display

When you choose Wireless display you switch the TV to reception from a mobile

phone or a tablet. Check, if your phone is equipped with remote screen technology or

acompatible one (e.g. Miracast). You can view the connection data directly on the main

TV screen. On your mobile phone, select the TV where your mobile phone will send the

broadcast. To end the connection press the button EXIT on your remote controller.

Wireless display – wireless display when connected to a mobile device.

Music (Enjoy music) – turning off the screen for just listening to the audio

Sleep (Sleep timer) – TV sleep timer

EN 15

Basic controls

FastCast - sharing other devices (mobile phone) to the TV. The device must support

FastCast technology or install the app as shown in the QR code.

Soundbar - adjusting the sound for richer delivery through the soundbar

Sport – sports picture and sound mode for better experience

5.5. Channel List

Press LIST to view the list of channels, which you previously saved. Move within the list

using the ▲/▼ buttons and press OK to select a new channel. Other important options

are available in the program list:

Red/Green button - quickly add the currently highlighted program to the Favorites 1-4 list

(red) or remove it from the list (green). The status is shown by the red symbol.

Note:

The last used list will always be displayed after pressing LIST until the FAV button

is pressed again to change it. Likewise, the FAV button on the remote control can be

used as a shortcut to quickly restrict the list to favourite programs only. If you have

not selected any favourite programs and you have selected the Favourites list that is

empty, change the list display to e.g. All using the red button.

16 EN

Revision 10/2022

Other menus

6. Other menus

Operating the TV is simple and intuitive. There are shortcut options from the remote

control for important or frequently used items.

The main items are SMART (SMART button), Quick Setup (Settings button), Source

(Sources button), Watch TV. You can also move Left/Right (left/right direction) between

the options. You can enter the content of each item by pressing Down and then selecting

an option and pressing OK.

6.1. Picture

Select settings according to your taste, source, scene, ambient conditions.

Picture Mode

Select from available settings Dynamic/Standard/Movie/Natural/Personal.

Personal mode allows to set customized values for Brightness, Contrast, Colour, Tint,

Sharpness, Backlight.

6.2. Aspect Ratio (Aspect Ratio)

Choose between Auto (depends on the video), 16:9, 4:3, Zoom1, Zoom2, FitScreen,

FillScreen, Other.

If the selected aspect ratio differs from that originally recorded in the image, it will distort

the ratios of objects, such as faces. The correct Auto mode function depends on the

correct information provided by the author. The availability of modes depends on the

signal source, e.g. DVB-T2 with a mandatory ratio will not allow a change at all.

6.3. Network

Internet connection (On/Off)

Use smart apps and HbbTV to connect your TV to the internet. Below are summaries of

information for wireless and wired connections, depending on which is active and you

have selected. At the bottom are More settings for speciﬁc network settings for experts,

according to their requirements.

Wired

Next select IP setting if your cable connection has automatic connecting available. In this

case keep the following selection DHCP to ON. Or you can set the connection method

manually for a ﬁxed address, in which case select DHCP to OFF. Next, you have to enter

the IP address, Netmask, Gateway and DNS according to your network operator information.

Wireless

TV searches wireless networks (option Scan). If your network is not listed (for example, it

is set as hidden), you must add it manually by selecting Manual. For this you will need its

SSID name and security. After selecting your network, enter the correct access information,

e.g. your password, according to the security method. IP Setting you can perform the same

way as with the cable connection (see above), automatically DHPC or manually.

EN 17

Other menus

6.4. Advanced Settings

Color Enhancement - according to natural color curves

ECO (On/Off) – setting variable picture parameters for agreeable viewing in power

saving mode.

Colour Temp – select Normal, Cool or Warm colour presentation.

Dynamic Contrast – advanced evaluation of the displayed scene and adjustment of contrast.

Noise Reduction - Select the image noise reduction between Off/Low/Medium/High/Auto

6.5. Sound

Choose according to your taste, sources, played sound, or ambient conditions of

aparticular setting.

Sound mode

Select from available modes: Standard/Music/Theatre/Sports/News/Personal

Advanced Settings

Audio Output - select from available outputs: speaker, headphone, HDMI

SPDIF Type – you can switch between linear PCM or Auto output when your connected

device has a decoder for the accompanying soundtrack.

SPDIF Delay – set in case of broken synchronization in SPDIF.

Audio Delay – ﬁne tuning of audio and picture time synchronization.

Auto Volume Control

Select On or Off – electronic equalization of different volume according to the program.

Equaliser – adjusting the sound in several frequency bands. Only for user audio mode.

Audio Description – When a sound track with an audio description is broadcast in the

currently running program, you can turn it on or off to add it to normal sound.

AD Volume – when audio description is enabled, the volume of the description can be

adjusted against the normal sound.

6.6. More settings

In addition to the important items described above, there are a number of other items

available for more precise adjustment to your needs.

6.6.1. Channel

This selection is used to set up the received channels, to scan the broadcasting bands,

and to save broadcast programs. Depending on the type of broadcast (air, cable, or

satellite), the content of the selection varies.

To receive broadcasts, you need to set each broadcast mode you want separately and

save its programs. Before setting each method it is important to select the correct source

SOURCE (DTV for digital DVB-T, ATV for analogue broadcasting).

18 EN

Revision 10/2022

Other menus

Tip:

We recommend checking the antenna and its quality, including the quality of the power

cable before starting the tuning. This is especially true for satellite dishes, where we

recommend that they be installed and inspected by an expert, e.a. for safety reasons.

Note:

Find out the type and parameters of your antenna installation, what signals are present

in your subscriber drawer before setup and tuning.

Tuning may be factory conditional on the speciﬁcation of a child fuse, depending on

the design and country. Enter factory default 1234 or disable the child lock completely

if you do not need it.

Country – select from the available countries the one which best suits your location.

Tuner Mode – select terrestrial (Antenna) or cable (Cable) or satellite (Satellite) according

to your reception.

• Antenna/Cable

Automatic Search – select if should be tuned digital DTV, analogue ATV or both. OK – starts

searching the whole bandwidth and informs you of the found channels and programs.

• Other selections are applicable only for cable reception:

Frequency Scan - select Quick, Advanced or Full according to operator information

Network frequency - set according to operator information

Network ID - entered according to operator information

Manual, Analogue, Digital

Use buttons ◄/► Channel intended to search for a program. The demodulation stripe

indicator will let you know about the presence of a broadcast on this channel and how

to ﬁnd programs on it. Press ▼ to go to Search and press OK. The found programs are

saved in your list, or the new search will overwrite those already present in your list.

Satellite reception (DVB-S/S2)

Make sure you have an antenna ready to receive DVB-S.

Satellite setting

ALERT:

Have a professional install your satellite antenna to ensure you get quality and

uninterrupted reception. The professional will inform you about the technical

parameters (in particular DiSEqC), which he used during the installation process

and which shall be entered into the TV receiver for a successful tuning process.

EN 19

Other menus

• Search for Satellites

Depending on the M7 FastScan search parameters set for certain countries or Others,

press OK to perform the search.

• Manual satellite tuning

Correctly determine the received satellites and assign them to DiSEqC. You can select

atransponder to control the received signal (e.g. Astra 3/23,5° E, 12070 GHz, horizontal,

27500 kSym/s). Also set the other satellite reception-speciﬁc parameters according to the

installation that the antenna installer tells you.

• Scan Mode

For searching, select a mode between Default/Network Scan/Blind Scan.

Note:

Depending on the model, design, and region, all options may not be available.

Automatic Channel Update

Select On if you want the TV to search the channels itself for changes as instructed by

the operators.

LCN

Turn On if LCN is used in your country, otherwise leave it Off.

HbbTV

Turn on if you want to receive additional information via an Internet connection for some

programs. TV stations that broadcast this data will display their own reception alert in the

picture. Switch to this data using the Red button on the remote controller and continue

according to the instructions of that TV station.

Common interface

If you have inserted a conditional reception module (CAM), you can enter its menu and

set it up in the Quick Options, described above. Some operators require their proﬁle to be

enabled. Follow the module instructions and operator information.

6.6.2. System

Language

Set the Language Menu for the TV to communicate with you.

Select your preferred language for audio and subtitles from the available languages. In

case of dual selection, the ﬁrst search is performed for the language which you enter

as your main language – Primary, if not found, the searching is for the – Secondary

language. If it is not found, the language that is selected as the ﬁrst to be broadcast is

selected. The recognition function depends on the number of broadcast languages and

their exact identiﬁcation in the broadcast.

Teletext

Choose Teletext encoding for correct viewing – East, West, Russian, and so on.

20 EN

Revision 10/2022

Other menus

CAM PIN - if you have a module that requires a PIN, enter it here.

Clock

• Auto sync Auto Sync – turns on or off time synchronization according to digital

broadcast. We strongly recommend that you keep sync on, because many other

advanced digital broadcasting features synchronize with time.

• Date&Time – only in case the auto sync is off. Set correct date and time.

• Daylight savings – on/off. If it is not broadcast, set it correctly to preserve other

time functions.

Sleep Timer

Set the time after which the TV turns off to Off (timer is not active) / 15 min / 30 min /

45min / 60 min / 90 min / 120 min.

Auto Standby

You can set the time after which the TV turns off, unless you press any button. The

options are: Off (TV will never turn off with this timer option) / 4 hrs / 6 hrs / 8 hrs.

Screen Saver - replaces the active image with variable images after a set period of time.

Location – Home for normal use, Shop without or including (Demo) function symbols.

Shop Mode - This mode sets the picture for in-store demonstration and displays a

description of the TV's functions. This mode is not energy efﬁcient and is not suitable for

home viewing.

Instant Power-On - shortens the TV start-up time to the previous values.

Child Code

You can limit some TV function and request a password entry. To ﬁrst activate the lock,

enter the factory password “1234”.

Activate the lock, position On, to display next settings.

Now you can change the factory password to your own in the item Set Password, where

you enter ﬁrst the current password and then the new one, which you have to repeat to

exclude an error. Remember your new password!

Parental Lock - if the digital programme is equipped with information about the required

age for viewing (e.g. 9, 12, 15 or 18 years), you can condition its viewing by entering the

correct password. The function depends on the broadcasted information about age. If

broadcast, the information about age is displayed with the description of the program,

which you can display by pressing . To activate, select the minimum age numerically.

Note:

If watching is conditional upon entering a password, you can enter it after pressing the

button OK.

Connectivity

Allows you to enable and conﬁgure connection devices such as HDMI CEC (T-link)

including its control (T-link Remote Control), format a USB drive for use in this TV (see

chapter on PVR) and a USB keyboard.

EN 21

Other menus

Universal Access

Allows you to set advanced options for using special broadcast services. To take

advantage of them, check with speciﬁc broadcasters to ﬁnd out which services their

broadcasts or speciﬁc programmes include. For example Audio Description, including

setting the ratio of the original sound to the accompanying description.

Help

Includes a brief description of how to set up and operate the TV

HDMI CEC, T-LINK

When you turn on the HDMI CEC function, only these HDMI and CEC devices will

communicate with each other when they are connected by HDMI cable if they are

equipped with HDMI CEC function.

ALERT:

HDMI CEC is a digital function. The number of available functions depends on

your connected device or the type of its input. The reliability of their application

can also be affected by poor quality or too long HDMI cable or proximity to the

sources of interference.

6.7. About TV

Software upgrade (USB/Network)

If the manufacturer releases new software for this TV in the future, it can be updated with

this option. When new software is released, a description of the new features and how to

update will be released.

Product Information

You can view the basic information about the device and its software again.

ALERT:

Compare the version when upgrading over the network. Use only the software

released by the manufacturer for the USB upgrade and designed exclusively

for your TV model. An attempt to update to unauthorized software may cause

irreparable damage to the TV that the warranty does not cover.

Restore to Default

If the TV settings have been changed in many places and it is difﬁcult to ﬁnd them all,

you can restore the TV to the way it came from the factory by selecting Restore Factory

Settings. All your personal settings are deleted, including the tuned channels, by selecting

Reinstall TV. You will be warned before doing this.

22 EN

Revision 10/2022

Media

7. Media

7.1. USB

Press USB/OKto open the memory previously inserted into the USB port of the TV.

Moving and selection in the Menu

Move among the items in the memory using the buttons ▲/▼/◄/► and continue to

conﬁrm by pressing OK.

To return to the list above use the item Return. Play the required ﬁle by selecting it and

pressing OK.

Press ◄ repeatedly to reach the display ﬁlter setting on the left side of the screen. You

can limit the viewing of either all items, or only movies, music, or photos speciﬁed by ﬁle

extensions using the ﬁlter.

Movies

Use for playback controls the usual buttons on the remote controller for fast forward

and reverse

, skip to previous

and next

item of the list, pause X and start B.

Similar buttons appear also when pressing the button OK.

You can also set a different aspect ratio, set the repeat of one, all or no ﬁle, view your

playlist, and view the available ﬁle information.

Music

To control the playback use the usual buttons on the remote controller for fast forward

and reverse

, pause X and start B.

You can also set repeat of one or all ﬁles, random play.

Photos

Use for playback controls the usual buttons on the remote controller for skipping to the

next B? and previous ?b item of the list, pause X and start B of playback. Similar buttons

will appear when you press the OK button.

You can also set repeat of one or all ﬁles, random play. Photos can be rotated left and right.

EN 23

EPG

8. EPG

EPG is a digital service that is delivered (exclusively) in the digital broadcasting by

the program provider and offers information about the programs up to seven days

in advance. The program provider is responsible for the amount and accuracy of the

information. Time information about programs refers to a single time, so it is necessary

for the TV to set the correct time incl. of the time zone, whether synchronized from the

broadcast or manually set.

EPG information is of two types. Press INFO to call up information about the currently

running programme and the next programme. This information disappears in a while

or you can suppress it by pressing again INFO. Another type of EPG is the table of

programs, which you call up by pressing EPG on the remote control.

Note:

The program data is broadcast for the entire multiplex (a set of programs broadcast at

the same frequency, e.g. 4–10 programs), cyclically, at several-minute intervals. TV

reads the data and continuously displays.them as soon as they are supplied. If the data

is not complete, select the program and then wait a while until the data is fully loaded.

It depends on the provider how fast the data is broadcast, how detailed and how

accurate it is. Usually, it takes longer to transmit to you multiple data (longer texts).

Tip:

TV's internal clock synchronizes from the broadcast quite accurately. If the TV does

not receive for a long time a broadcast with time, the internal clock can differ from real

time and affect the accuracy of long-term scheduled events. To synchronize the TV

clock switch on the TV set and wait a while.

You can select from other options

Record – select to set the time for recording a program (Red button)

Remind - select to set a reminder time for the show(Green button).

These options are also available from the remote control using the buttons listed in the

brackets above.

Each time function must be edited (set times and repeats) and then it is necessary to

save it to the schedule by conﬁrming OK. In case of a time conﬂict between two events

the TV will alert you when saving it. A saved event carries a small alarm icon (for

reminders) or a red dot (for entries) next to its name in the EPG list, if there is space to

display the icon in the list.

You can view the list of recordings made (and delete some if necessary) by selecting

EPG/Recordings (Yellow button).

24 EN

Revision 10/2022

REC

9. REC

ALERT:

To use the PVR functions, the connected disc must be formatted to the TV

system. Formatting will irreversibly delete previous data, back it up beforehand!

This formatted disc can only be used in this TV.

During reception of digital broadcast, part of the broadcast can be recorded for later use.

Records already made are available in MENU/Channel/Playlist.

Recording - press the REC button to start recording and conﬁrm with Applyafter selecting

the scheduled end (if EPG information is available). Press the button STOP, the system

will notify you about full stop of the recording. Conﬁrm this by selecting DONE and

pressing OK to end the recording.

Timeshift – it is the option to stop the current broadcast which is recorded in the

meantime on the connected memory device. After a while, you can start the broadcast

again and move it back and forth. This way, only a small portion of the broadcast can be

stored depending on your PVR settings.

Press PAUSE to pause. For fast forward or reverse through the recording press the

corresponding buttons

Recording, PVR

To ensure successful use of the PVR function, it is important for the combination of

read and write speed to be compatible with the current type of digital broadcasting and

its speed multiples. For maximum performance of the USB memory, it is necessary to

format it in the TV. For example, if your disk speed is not sufﬁcient and you try to record a

demanding program, the TV will either display a note about insufﬁcient disk speed (later

playback problems) or a complete failure/stop of the recording, depending on the current

broadcast speed. The speed of the broadcast and of the disc is evaluated continually and

a message about the speed can appear at any time (repeatedly) during recording. If the

speed is insufﬁcient, use a faster disk.

ALERT:

When recording or timeshift viewing channels protected by conditional access,

your conditional access system can restrict processing according to your

conditional access rules. For example, recording programs to be viewed later is

different from viewing programs in real time and the stored time code can limit

or prohibit your actions. Do not violate copyright laws. The system can refuse

to record programs even considering the parameters of connected memory or

special protective broadcasting functions of both the entire program and individual

programs or program segments (for example due to age or regional restrictions).

Please contact your conditional access system provider for more information.

EN 25

Troubleshooting

10. Troubleshooting

NOTICE:

Under no circumstances should you try to repair the appliance yourself, the

device does not contain parts that could be repaired by the user. Always take the

device to an authorized service center if a repair or adjustment are necessary

other than regular maintenance. Unauthorized interference with the device

is considered a breach and the loss of warranty claim. The importer, supplier,

distributor or vendor shall not be liable for any losses caused by a violation of

regulations listed in this manual. Do not open the device, there is the danger

of electric shock. In the case of device failure, ﬁrst check the following list of

problems and their solutions. If you fail to remove the defect according to the

following tips, contact your vendor.

Problems Possible solutions

The TV set has no power. Check the attached power cord and the functioning of

the electrical outlet.

Unplug the power cord, plug it in after 60 seconds

and turn the TV set on again.

No picture. Check the antenna connection.

There could have been problems at the broadcasting

station, try another station.

Adjust contrast and brightness.

Good picture, but no sound. Raise volume.

Check that the sound is not muted (Mute function).

Press MUTE on the remote controller. Check audio

settings.

If you use an external device, make sure that itsvolume

is not muted or the sound is not switched off.

If you use the A/V or a component input, make sure

that the cables are correctly connected and are not

loose. If you use a cable with DVI reduction on HDMI,

you need a separate audio cable.

Make sure that the headphones jack is not occupied.

Good sound, but an unusually

colored picture or no picture.

Check the connection and the state of the antenna.

If you use a component input, check the connection.

Incorrect or loose connection can cause problems

with colors or empty screen.

26 EN

Revision 10/2022

Troubleshooting

Problems Possible solutions

The TV set does not respond to

the remote controller.

The batteries in the remote controller might be empty.

If it is necessary, replace them with new ones.

Clean the lens of the remote controller. The distance

between the LED TV set and the remote controller

should be no more than 8 m, in the recommended

operating angle and with no obstacles in the path

of the beam. Prevent the impact of strong light

(daylight, sunlight or ﬂuorescent light lamps and

ﬂuorescent tubes) on the TV and remote controller.

There are color points on the

screen.

Although the LED screen is made with high-precision

technology and 99.99% or more of the pixels are

operational, the screen can display permanently

unlit or lit points of light (red, blue or green). This is

a construction feature of the LED screen and is not a

malfunction.

The picture falls apart. Keep the TV set away from interfering sources of

electricity, such as cars, hair-dryers, welders and any

optional equipment.

The disintegration of image may be caused by

atmospheric phenomena, such as a local or distant

thunderstorm.

When installing optional equipment, leave a space

between the optional equipment and the TV set.

Check the antenna and the connection.

Keep the antenna away from the power or input/

output cables.

After automatic tuning only

some channels are available.

Check if your area is covered by digital TV

broadcasting. Try to retune or manually tune the

missing channels.

Check if you use the correct antenna type – see page

14 “Connecting the antenna”.

Cannot select a channel. Check if the channel is not blocked in the main menu

settings.

Cannot play from the USB

device.

Check the connecting channel between the USB and

power connection. The hard disc was not formatted.

Make sure that the USB ﬂash unit is compatible and

contains supported formats of multimedia data.

The picture is distorted, contains

macroblocks, microblocks,

points, large pixels, etc.

Video compression can cause disruption, especially

during rapid movement, e.g. In sports programs and

action movies.

EN 27

Troubleshooting

Problems Possible solutions

Speaker noise Check the cable connections, make sure that the

video cable is not connected to video input.

Sound distortion can be caused by a low level of

the signal.

The TV set turns off

automatically.

Make sure that the sleep timer or power save mode

timer are not on.

The TV set turns on

automatically.

Make sure that the timer to turn on is not on in the

settings menu (Settings).

The picture is not displayed on

the whole screen.

First make sure that the problem is not caused by the

input signal. Then try to adjust the item Zoom in the

Functions menu.

Picture defects and their causes

Snowy screen

Snowy screen is usually caused by a weak signal. Change the antenna setting or install

an antenna booster.

Double images or ghosting

Double image is usually caused by reﬂection from tall buildings. Adjust the antenna

orientation or place it higher.

Radio frequency interference

Waves are moving on the screen, which is usually caused by neighbouring radio

transmitters or shortwave receiver.

Interference by electrothermal devices with high temperature

Inclined or arrow shaped patterns appear on the screen or a part of the picture is

missing. This is probably caused by electrothermic devices with high temperatures in a

nearby hospital.

28 EN

Revision 10/2022

Technical speciﬁcations

11. Technical speciﬁcations

Model SLE 43FS602TCS

Panel size 43" (108 cm)

Power consumption

75 W

Standby consumption <0.5 W

Rated voltage

AC 180–240 V ~ 50/60 Hz

Remote controller Yes

VESA wall mount 200 × 100 mm

Dimensions with stand (w × h× d) 967 × 616 × 222 mm

Dimensions without stand (w × h× d) 967 × 563 × 89 mm

Net weight with stand

8,4 kg

Connection

Mini AV input 1×

RF IN 2×

HDMI 2× (1×ARC)

Coaxial output 1×

USB 2×

Supported USB formats MKV, AVI, MP4, MOV, XviD, MP3, AAC, WAV,

JPEG, JPG

Cl slot yes

RJ45 yes

Other functions

WXGA resolution 1920 × 1080

Aspect ratio 16:9

Response time (ms) 8 ms

Brightness 240 cd/m²

Viewing angle H: 178°, V: 178°

Video system PAL, SECAM

Audio system BG/DK/I/L/L'

Stereo sound NICAM/A2

Audio output Headphones output

PVR recording to USB Yes

Correction of sound No

Digital comb ﬁlter (DCF) Yes

Dynamic noise reduction (DNR) Yes

Timeshift function (Timeshift)

(only freely distributed programs)

Yes

EPG Yes

Teletext Yes

Teletext pages 1000

OSD menu Yes

Zoom Yes

Timer OFF / ON / SLEEP Yes

EN 29

Technical speciﬁcations

Subtitles Yes

Audio language Yes

Channel list Yes

Favourites list Yes

Image freeze Yes

Radio Yes

Parent lock Yes

Hotel mode Yes

Note:

Technical speciﬁcations may change without prior notice.

The original version is in Czech.

Manufacturer address: FAST ČR, a.s, U Sanitasu 1621, 251 01 Říčany, Czech Republic

11.1. Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2013

INFORMATION Value Unit

1. Supplier name or trademark SENCOR

2. Model identiﬁer SLE 43FS602TCS

3. Energy Efﬁciency Class for standard Dynamic

Range (SDR)

4. On mode power demand for Standard Dynamic

Range (SDR)

42 W

5. Energy Efﬁciency Class for standard Dynamic

Range (HDR)

n/a

6. On mode power demand in High Dynamic

Range (HDR) mode

n/a W

7. Off mode, power demand 0 W

8. Standby mode power demand 0.5 W

9. Networked standby mode power demand 0.5 W

10. Electronic display category Television

11. Size ratio 16 : 9

12. Screen resolution (pixels) 1920 x 1080 pixels

13. Screen diagonal 108 cm

14. Screen diagonal 43 inches

15. Visible screen area 4977,9 cm

16. Panel technology used LED LCD

30 EN

Revision 10/2022

Technical speciﬁcations

17. Automatic Brightness Control (ABC) available No

18. Voice recognition sensor available No

19. Room presence sensor available No

20. Image refresh frequency rate 60 Hz

21. Minimum guaranteed availability of software and

ﬁrmware updates (until):

30.11.2030

22. Minimum guaranteed availability of spare parts (until) 30.11.2029

23. Minimum guaranteed product support (until) 30.11.2030

24. Power supply type: Internal

i. External standardised power

supply (included in the

product box)

Standard name N/A

Input voltage N/A V

Output voltage N/A V

ii. External standardised suitable

power supply (if not included in

the product box)

Standard name N/A

Required output

voltage

N/A V

Required output

voltage

N/A A

Required current

frequency

N/A Hz

EN 31

Technical speciﬁcations

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING

MATERIALS

Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates

that this product shall not be treated as household waste. Please, dispose of

this product at your applicable collection point for the recycling of electrical &

electronic equipment waste. Alternatively in some states of the European Union

or other European states you may return your products to your local retailer

when buying an equivalent new product.

The correct disposal of this product will help save valuable natural resources

and help in preventing the potential negative impact on the environment and

human health, which could be caused as a result of improper liquidation of

waste. Please ask your local authorities or the nearest waste collection centre

for further details. The improper disposal of this type of waste may fall subject to

national regulations for ﬁnes.

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the necessary

information from your seller or supplier.

Disposal in other countries outside the European Union

If you wish to dispose of this product, request the necessary information about

the correct disposal method from local government departments or from your

seller.

Hereby, FAST ČR a.s. declares that the radio equipment type SLE 43FS602TCS

is in compliance withDirective2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: www.sencor.eu

Changes to the text, design and technical speciﬁcations may occur without prior notice

and we reserve the right to make these changes.

32 EN

Revision 10/2022

EN 33

Warranty conditions

Warranty card is not a part of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty

is limited to the following conditions. Warranty is referred only to the customer goods using for common

domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or

at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when

the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify

the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted.

In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim

application till the date of taking over the product by end-user, or the date the end-user is obligated to take it

over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed

following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows:

• Defects which were put on sale.

• Wear-out or damage caused by common use.

• The product was damaged by unprofessional or wrong installation, used in contrary to the applicable

instruction manual, used in contrary to legal enactment and common process of use or used for another

purpose which has been designed for.

• The product was damaged by uncared-for or insufficient maintenance.

• The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).

• Defects on functionality caused by low duality of signal, electromagnetic field interference etc.

• The product was mechanically damaged (e.g. broken button, fall).

• Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable

working conditions (e.g. high temperatures, high humidity, quakes).

• Repair, modification or other failure action to the product by unauthorized person.

• End-user did not prove enough his right to claim (time and place of purchase).

• Data on presented documents differs from data on products.

• Cases when the claiming product cannot be indentified according to the presented documents (e.g. the

serial number or the warranty seal has been damaged).

Authorized service centers

Visit www.sencor.eu for detailed information about authorized service centers.

FAST ČR, a.s.

U Sanitasu 1621

Říčany 251 01, Czech Republic

The original version of the manual is Czech, other language versions are translated accordingly.

Sencor SLE 43FS602TCS SMART Full HD LED television

Product's Documents

User Manual

Specifications

Sencor SLE 43FS602TCS Questions and Answers

Related Products

Sencor SLE 40FS602TCS SMART Full HD LED television

Sencor SLE 43FS600TCS SMART Full HD LED television

Sencor SLE 40FS600TCS SMART Full HD LED television

Sencor SLE 40FS601TCS SMART Full HD LED television

Sencor SLE 42FS601TCS SMART Full HD LED television