Loading ...
Loading ...
Loading ...
60
Figure 5-30 Smart Plan
Step 2 Click on the
Smart Plan
page.
You might need to disable other smart plans before enabling it.
●
The icon that you have selected will be lighted.
●
Click the icon again to cancel the smart plan.
Step 3 Click
Save
.
5.3.4 Configuring Intelligent Rules
Set rule for IVS, including tripwire and intrusion.
Background Information
For the functions and applications of the rules, see Table 5-10. This section uses configuring tripwire
as an example.
Table 5-10 Description of IVS functions
Rule Description Applicable Scene
Tripwire
When the target crosses tripwire from the
defined motion direction, an alarm is
triggered, and then the system performs
configured alarm linkages.
Scenes with sparse targets and
no occlusion among targets,
such as the perimeter
protection of unattended area.
Intrusion
When the target enters, leaves, or
appears in the detection area, an alarm is
triggered, and the system performs
configured alarm linkages.
Procedure
Step 1 Select
Setting
>
Smart Thermal
>
IVS
>
Rule Config
.
After entering the
Rule Config
page, the PTZ locking function is automatically enabled.
The locking time is 180 seconds. During the locking period, you can only control the PTZ
manually. Click
Unlock
at the lower-left corner of the
Rule Config
page to manually
Loading ...
Loading ...
Loading ...