Loading ...
Loading ...
Loading ...
125
wiper stops.
2. Click
Start
to get the wiper work in the interval time that you have just configured,
and click
Stop
to stop it; click
Once
to get the wiper work for one round.
●
Auto
: Adjust the sensitivity according to the actual situation.
Step 3 Click
Save
.
6.4.3 Configuring Fan
Step 1 Select
Setting
>
Peripheral
>
Fan
.
Figure 6-53 Fan
Step 2 Select the
Enable
checkbox.
Step 3 Configure the running mode.
●
Auto
: Click
Save
, and the fan works automatically.
●
Manual
: Select the
Enable
checkbox to manually start the fan.
Step 4 Click
Save
.
6.4.4 Configuring Heater
Step 1 Select
Setting
>
Peripheral
>
Heater
.
Figure 6-54 Heater
Step 2 Select the heat type as needed.
Step 3 Configure the heater parameter.
●
Auto
: Select
Start Tem
and
Stop Tem
as the temperature range for heater to start, and
click
Save
. When the sensor temperature is in the range, heater works automatically.
●
Manual
: When you think it is cold enough and you want to let the Camera work in a
warm condition, you can select
Manual
as the
Mode
. Select the
On
checkbox, and then
click
Save
.
Step 4 Click
Save
.
Loading ...
Loading ...
Loading ...