Loading ...
Loading ...
Loading ...
CONTROL PANEL FEATURES (CONT.)
NOTES:
•if you have entered all settings for a function but
do not touch START/ENTER in 5 seconds, the
START? indicator light will show.
• if you open the door while the oven is on and
then shut the door, the START? indicator light will
show. Touch START/ENTER to continue.
• if you choose a function but do not touch another
command pad within 1 minute, the display returns
to the time of day and you have to start over.
Your microwave oven comes with audible
signals that can guide you when setting and using
your oveR:
• [_ A programming tone will sound each time
you touch a pad.
• [_ One long tone signals the end of a Kitchen
Timer countdown.
•II q Four tones signal the end of a
cooking cycle.
FT_q FI_q
• "l_t2Jl"JJJI Two quick, short tones sound once
every minute for the first 15 minutes after an end-
of-cooking signal as a reminder if the food has
not been removed from the oven.
•I_1_ Two quick, short tones will sound while
entering and exiting from a hidden feature (for
example, Child Lock).
• [_ "_[_-_l"_)))IThree tones sound if you have
made an incorrect entry.
To disable the programming tone:
TOUCH
and hold for 5 seconds
To turn the programming tone back on:
TOUCH
To disable all audible signals except the
end-of-timer signal:
TOUCH
and hold for 5 seconds
To turn signals back on:
TOUCH
and hold for 5 seconds
NOTE: Two tones will sound when audible signals
are turned on or off. This will only work when the
oven is in standby mode.
You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan stops,
but the light stays on. To restart cooking, close the
door and
TOUCH
If you do not want to continue cooking:
• Close the door and the light goes off.
OR
•TOUCH
NOTE: Before setting a function, touch
OFF/CANCEL to make sure no other
function is on.
and hold for 5 seconds
12
Loading ...
Loading ...
Loading ...