Loading ...
Loading ...
Loading ...
12
Attaching coupler to regulator
1. If not already inserted, insert the CO
2
Directional Washer into the Keg Coupler. Then
screw the CO
2
Line onto the Keg Coupler.
2. Push the other end of the CO
2
Line through
the hole in the rear of the cabinet. Slide a
Hose Clamp onto the end of the CO
2
Line,
then attach the hose to the barb tting on the
bottom of the regulator. Secure the CO
2
Line
by tightening the Hose Clamp with a athead
screwdriver.
Hose
Clamp
Attaching regulator to CO
2
tank
IMPORTANT! When you purchase your rst keg of beer, you must also have your
CO
2
Tank lled by a local supplier. CO
2
Tanks can be lled at locations such as
welding supply shops, party stores, and wherever kegs are purchased.
1. Align and hook the 4 holes of the CO
2
Tank
Holder with the screws on the back of the unit.
2. Make sure the white nylon High Pressure
Washer (already installed) is attached to the
Regulator.
Loading ...
Loading ...
Loading ...