Loading ...
Loading ...
Loading ...
115
FlexFit Pro
ENGLISH
Press the SET key. The swing louver function icon will be displayed. Press the keys to advance through the functions to select the SLEEP func- keys to set the will remain on.If neither key is pressed within 10 seconds, or if the MODE, FAN, or ON/OFF keys are pressed prior to pressing the SET key, the setting function is canceled and reverts back to the previous setting.To cancel the Sleep function. Press the SET key. The swing louver function icon will be displayed. Press the keys to advance through the functions to select the SLEEP function. function.NOTE: This function requires the ON/OFF key LED to be turned ON and the screen backlight to be illuminated. Sleep Functionthe indoor unit has reached 500 hours of operat-ing time.the icon and reset the operating time.NOTE: This function requires the ON/OFF key LED to be turned ON and the screen backlight to be illuminated. Filter CleaningWIRED CONTROLLER OPERATIONSettings & FunctionsPress the SET key. The swing louver function icon will be displayed. Press the keys to advance through the functions to select the Heat Reclaim To cancel the Heat Reclaim Ventilation function, repeat the above steps.If neither key is pressed within 10 seconds, or if the MODE, FAN, or ON/OFF keys are pressed prior to pressing the SET key, the setting function is canceled and reverts back to the previous setting.This function is reserved for future models.NOTE: This function requires the ON/OFF key LED to be turned ON and the screen backlight to be illuminated. Heat Reclaim VentilationNote: These functions require the ON/OFF key LED to be turned OFF and the screen backlight to be illuminated.Auto RestartSetting DIP switch SW1-4 located on the PCB of the wired control to the “on” position will disable the auto restart func-enabled (default position). When the switch is in the “on”posi-tion, auto-restart is disabled.Information retained in auto-restart are: Mode, Fan Speed, Temperature Setting, Swing State, and Heat Reclaim Ventila-tion function. Communication Error of Wired Controller If there is no communication between the wired controller and indoor unit for 4 minutes, when checking error codes, “07 will be displayed in the upper right corner of the display. Other Functions
Loading ...
Loading ...