Loading ...
Loading ...
Loading ...
3534
ENEN
Distance between units (A+B)
C
A
18” model 24” model 30” model 36” model
B
18” model 7/8” (22 mm) 15/16” (23.5 mm) 1” (24.5 mm) 1” (25.5 mm)
24” model 15/16” (23.5 mm) 1” (25 mm) 1” (26 mm) 1 1/16” (27 mm)
30” model 1” (24.5 mm) 1” (26 mm) 1 1/16” (27 mm) 1 1/8” (28 mm)
36” model 1” (25.5 mm) 1 1/16” (27 mm) 1 1/8” (28 mm) 1 1/8” (29 mm)
Once the appliances have been adjusted and
properly levelled, loosen the two screws holding
the sealing plate in position.
Lower the plate until flush with the floor, and re-
tighten the screws. This will ensure optimized
airflow through the condenser necessary for proper
operation.
> Next join them at the front attaching the plastic
connecting brackets with the supplied screws [ 3 ].
It is suggested to use two screws for connecting
each bracket; one from each side [ 4 ].
> Finish o by mounting the central profile cover
onto the central brackets, by pushing it until a click
is heard
[ 5 ].
> Once completed, push the units into their final
position [ 6 ].
Always mount front panels on door before pushing
the unit into its final position inside the cutout or
structure.
> Check the levelling of the appliance, adjusting its
feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets by
fixing with the supplied brackets on the appliance [
7 ]. The door must be open to access the brackets
for attachment to the cabinetry.
6. INSTALLATION: BOTTOM COMPRESSOR MODELS
> Mount the covering frames onto the brackets
used to join the units, first insert them laterally and
then push firmly until a “click” is heard [ 8 ].
Take care as appliances will be front-
heavy and may tip before they are secured
to the adjacent furniture.
5
6
7
8
7
8
3
4
Loading ...
Loading ...
Loading ...