Loading ...
Loading ...
Loading ...
3130
ENEN
IMPORTANT: The following instruction for installation apply to all Fulgor Milano models.
6.1 Built-in installation of
single appliance
For a built-in installation, to cover gaps between
the appliance and the adjacent cabinets and affix
the appliance to the cabinetry, use the supplied
10 x piece bracket kit. Follow the instructions
included in the bag with the brackets for
placement of brackets on the appliance.
Operate as follows:
> Push the appliance into the installation cutout [ 1 ].
> Always mount front panel on door before
pushing the unit into its final position inside the
cutout or structure.
> Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets
using the 10 x spacer brackets. [ 2 ].
Door must be open to access the brackets. Screws
for fixing the brackets to adjacent cabinetry are
not included.
> Mount the bracket covers: first insert them
laterally and then push firmly until a “click” is
heard
[ 3 ].
Side profiles mounting:
(Bird’s eye view)
A Plastic connecting brackets
B Profile trim cover
6.2 Built-in installation of two or more
appliances
> The central profile is provide with freezer and
wine cellar columns.
Plastic covering frames are provided for
closing gaps between the appliance and the
adjacent cabinets.
Operate as follows:
> Position the appliances in front of the installation
area, leaving enugh space to operate at their back
[ 1 ].
6. INSTALLATION: BOTTOM COMPRESSOR MODELS
Appliance
Wall or furniture
A
B
B
Click!
Click!
3
1
2
Loading ...
Loading ...
Loading ...