Loading ...
Loading ...
Loading ...
- 11 -
- 10 - - 3 -
1 -A
1 -B
1 -C
1 -C
6
5
6
6
Figure 1
Figure 2
3
The slider nut has been fixed in
the inner frame A, which can be
used to fix the support rod
14
1
Hang the inner
frame slot on
the wall bracket
Figure 13
Figure 14
6.3 Hang the assembled screen on the wall (operated by two persons) (Figure 14)
14
14
15
15
6.2 Drill holes on the marks on the wall with a percussion drill, insert the rubber plug, screw on the screws,
and fix the wall bracket (Figure 13)
1.0 Precautions
2.0 Assemble the frame
To ensure the projection performance of this product, please pay attention to the following operating
requirements.
1.1 When assembling, find a suitable size floor or table. The surface must be clean and free of any obstacles.
The floor or table must be covered with clean materials such as cloth, film, blankets, etc.
1.2 Handle with care during installation to prevent personal
injury or property damage.
1.3 Do not touch the surface of the projection screen
with unglved hands.
1.4 Do not touch the projection surface with sharp or hard
objects to prevent damage to the screen material.
1.5 Keep children away from the screen to prevent accidents.
1.6 The surface of the screen must be cleaned and treated regularly, and it is
recommended to take care of it once every two weeks.
1.7 Please use a soft cotton cloth to wipe (dip some water) gently, and it is not advisable to
use any chemical cleaners or alcohol.
2.1 Open the package and check whether the accessories in the box are complete.
2.2 Connect inner frame A and inner frame B first (Figure 1)
2.3 Insert the 4 corner connectors into the inner frame C (picture 2)
2.4 Assemble the four inner frames and struts as shown in the figure below, and lock them with screws
after the inner frame is assembled (Figure 2, Figure 3);
○
○
○
○
Loading ...
Loading ...