Loading ...
Loading ...
Loading ...
1. Turn the dust drum upside down on the floor.
2. Insert the caster feet into the bottom ofdrum, as
shown (4 places).
3. Push on the caster foot until the footis flushwith
bottom of the dust drum.
4. Insert the caster stem into the socket of the
caster foot, as shown (4 places).
5. Push on the caster until the ball on the caster
stern is inserted all the way into the socket. You
will be able to feel the ball snap into the socket
and the caster will swivel easily when positioning
is correct.
6. Turn the drum upright.
NOTE: If the casters are noisy you may put a drop of
oil on the roller shaft to make them quieter.
CASTER BALl
PERFORMANCE iNDiCATOR
The performance indicator senses air flow
through the vacuum cleaner.
When the vac is not running the green
indicator is no_ visible.
ON-OFF
SWITCH POWER CORD
/
Under normal operating conditions the green
indicator will rise from the control panel
recess, indicating the system is functioning
properly.
NOTE: The use of certain accessories that
restrict the air flow into the wet-dry vac such
as the crevice tool may cause the per-
formance indicator to drop out of sight. The
vacuum cleaner and filter are still working
and can continue to be used.
CORD WRAP
AREA
/
LID HANDLE
VARIABLE SPEED
IDE CONTROL
=ERFORMANCE INDICATOR
PORT
When the filter is clean and the hose and
nozzle unobstructed the Green Performance DUS
indicator will be clearly visible.
When filter is extremely dirty or the hose is
clogged, the indicator wilt drop down out of
s_ght.
When this occurs_ check the hose and nozzle
fo r obstructions, if these are clear, set switch
to "OFF', unplug the vac. remove and clean
or replace filter.
When picking up water or other liquids (refer
to warnings on page 2 of this manual_ and
the nozzle or hose end is completely under
water the indicator will also drcp out of
sight. In this situation no air can flow, how-
ever the system is functioning and pickup
will continue.
CASTERF
CASTERS
DRAIN
PERFORMANCE INDICATOR
\
\
\ RECTANGULAR
\ NOZZLE
\
\
3-POSITION
3-POS_ITBON SWITCH
"HI" position will operate vac at full power.
"OFF" turns vac off.
VARIABLE SPEED
SLIDE CONTROL
"VAR" allows you to run vac at different
power settings by using the VARIABLE
SPEED CONTROL
This atlows you t° "Dial DOwnl' the suction
of the vac for use on carpet Or ShOp curtains
or whenever you need less than full power.
Loading ...
Loading ...
Loading ...