Loading ...
Loading ...
Loading ...
11
CLEANING THE DEVICE
Cleaning the water containers
B
C
D
1. Make sure the plug has been pulled out
2. Empty the dirty water container (8). To do this, press
down the handle of the dirty water container (3) and
pull it (8) forwards out of the main unit (see picture).
3. Pull the silicone cap of the dirty water container (B)
upwards.
4. Pour away the dirty water and rinse out the dirty wa-
ter container (8) thoroughly with warm water.
5. Remove the fresh water container (2) from the con-
tainer support (14) (see the “Pre- paring the Device /
Filling the Fresh Water Container” section) and pour
away the rest of the cleaning solution. Rinse out the
fresh water container (2) thoroughly with warm water.
6. Allow all parts to dry completely before assembling them.
7. Insert the fresh water container (2) back into the device (see the “Before Initial
Use” chapter).
8. Press the silicone cap firmly onto the dirt container (8) and insert the dirty
water container (8) into the main unit. When you do this, make sure that the
recess on the dirty water container (8) fits in the frame of the main unit. Press
the dirty water container (8) against the frame of the main unit until you hear it
engage.
B
C
D
Cleaning the carpet suction nozzle
1. After cleaning a carpet, clean the carpet suction
nozzle (6). To do this, flip up the closure cap of the
hose connection (7). Grip hold of the upper end of the
carpet suction nozzle (6), pull it up and remove (see
picture).
2. Rinse out the carpet suction nozzle (6) thoroughly
with warm water.
3. Allow the carpet suction nozzle (6) to dry completely
and insert it back into the main unit. To do this, place
the locking lugs of the carpet suction nozzle (6) into
the recess- es on the main unit and press down the
carpet suction nozzle (6). It must engage audibly.
1. For cleaning the carpet brush (5) place the device on the floor so that the bot-
tom of the device is accessible. Attention! Make sure you empty the water
containers prior to cleaning.
2. Press together the locking device (C, D) and pull out the carpet brush (5) (see
picture).
SC17320N_IMindd.indd 11 27/02/2019 08:35
Loading ...
Loading ...
Loading ...