Loading ...
Loading ...
Loading ...
10
CLEANING
A
1. Use the upholstery nozzle for cleaning upholstered furniture.
To do this, first flip up the closure cap of the hose connection
(7), place the end of the hose onto the connection and press this
down firmly until you feel it engage.
2 Step on the On/Off switch (12) to switch on the device.
3. Pull the upholstery nozzle along the edge of the
upholstered furniture and hold down the button for
dispensing the cleaning solution on the handle of the
upholstery nozzle (A) (see picture). Let go of the button (A)
at the other end of the strip.
4. Pull the upholstery nozzle over the same strip. The dirty water will be sucked up.
5. Continue in the same way as with carpet cleaning (see the “Use” chapter,
“Cleaning the Carpet” section).
After Use
• Empty both water containers after each use.
• Allow the freshly cleaned surfaces to dry completely.
• If possible, do not tread on the carpet while it is still damp. If it has to be
trodden on, put down white or colourfast towels and tread on them.
• If cleaning solution has got onto wooden floors or furniture, wipe it away.
• Vacuum the dry carpet or upholstered furniture with a vacuum cleaner. If
possible, use a brush attachment to do this.
CLEANING THE DEVICE
Remove the mains plug from the plug socket before cleaning the device.
• Do not use any chemical cleaning agents to clean the device. These may dam-
age it.
• Before the device can be stored away, the water containers must be emptied
and rinsed out.
SC17320N_IMindd.indd 10 27/02/2019 08:35
Loading ...
Loading ...
Loading ...