Loading ...
Loading ...
Loading ...
4
EN
www.napoleon.com
N415-0563CE-GB-DE JUL 16.19
Correct Disposal Of This Product
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
They can take this product for environmental safe recycling.
Gas Cylinder
For opmal performance the grill should
be operated on propane. The minimum cylinder size for butane units is 13kg, and for propane units is 6kg.
Ensure that the cylinder can provide enough fuel to operate the appliance. If in doubt, check with your
local gas supplier.
•
• Never connect a cylinder, which does not meet local codes.
Only cylinders connected to the appliance may be stored in the enclosure, or close to the appliance.
must not be exposed to extreme heat or direct sunlight.
Cylinder Connecon: Remove the cap or plug from the cylinder fuel valve. Tighten regulator to cylinder
valve. Leak test all joints prior to using the barbecue. A leak test must be performed annually, and each
Gas Hose
WARNING! This gas grill must be installed by a licensed gas er. The gas grill can not be
connected to the gas supply using hoses except to connect the cylinder regulator to the piping system.
The increased temperature within the enclosure may cause the hose to melt. Use the provided exible
metal connector to connect the gas grill to either approved rigid piping, approved copper tubing or
approved exible metal connectors. Ensure the installaon conforms to all local and naonal codes.
The enre gas supply installaon must be leak tested before operang the gas grill. Refer to the manual
for complete grill assembly instrucons.
• If the hose and regulator are not included by the manufacturer, then only hoses and regulators which
• Ensure that the hose does not come into contact with grease, other hot drippings, or any hot surfaces
on the appliance.
•
• The recommended hose length is 0.9m. The hose must not be longer than 1.5m.
• Ensure that the hose is twist and kink free when installed.
• Replace the hose before expiry date printed on the hose.
Example Cylinder
!
Loading ...
Loading ...
Loading ...