Loading ...
BASIC PARAMETER
CIRCUIT DIAGRAM
INSTRUCTION
Double Cylinder Electric Fryer
VH430-NEW
AC110V
50Hz-60Hz
2.5kW+2.5kW
21.7*17.3*12.2 Inch
S----Temperature Controller
HL1----Power Indicator(GN)
HL2----Heating Indicator(YE)
EH----Heating Tube
E----Ground Protection
Item Name
Item No
Voltage
Frequency
Max Power
Dimension
Check whether the power supply installation is normal and reliable
Keep the oil level in the oil pan greater than 1/2 depth of the oil pan during use.
1) Keep the reference point on the knob aligned with OFF, and insert the power
cord plug into a suitable socket. The green POWER indicator light will turn on. At
this time, electricity will be supplied to the machine. Rotate temperature knob
clockwise and put the reference point on the knob aligned with the required
degree. At this time, the red HEATING indicator light will turn on, which shows that
the electric heater is working and the oil starts to heat up.
2) When the oil temperature rises to the required temperature, thermo-controller
will cut o the power automatically. At this time, the red HEATING indicator light
will turn o, which shows that the electric heater stops heating up.
3) When temperature drops a little, the thermo-controller will turn on the power
automatically and the red HEATING indicator light will turn on, which means the
heater starts heating up again and the oil temperature will rise.
4) The machine works in this way repeatedly in order to make sure oil temperature
is within a certain selected range.
NOTE: To avoid sudden power failure, it is recommended that the fryer should be
plugged in a wall socket rather than a wiring plate type socket and the two plugs are
not allowed to plug in the same socket plate.
1.
2.
3.
The cover is designed for keeping the device warm and clean. When users put on
the cover, the user should make sure there is no water on it in case that water drips
into the pot, causing hot oil to splash and hurt people.
The enclosed special basket is used for frying small pieces of food. There is a
hanger and a handle on the basket. Put basket into the oil while cooking. After
frying, lift and hang the basket on the machine to lter oil. The ltered oil will ow
in the pot. If frying large food, can put it directly in the pot.
After cooking, please rotate temperature knob counter-clockwise to the OFF
position and pull the plug for safety.
If user wants to pour oil out of the pot, the user should do it after temperature
lowers to room temperature. First, user should take out the basket and back-plate,
then cut o the power and turn over the controlling box (at this moment electric
heating tube in pot is erected). Alternatively, user can take out controlling box and
put it on a dry place, then the oil pot can be removed for cleaning.
User should clean oil and lth residue on electric heating tube regularly.
The back plate is designed for protecting the electric heating tube. The back plate
must be installed properly in the oil pot when frying food.
Every fryer with temperature range of 60 to 200°C has a RESET protecting button
for overheating. When temperature is higher than the pre-set one (240°C), the
temperature limiter will work to cut o the power and protect the machine. User
may nd the temperature limiter has worked in the following situation: While the
power connection is normal and the green POWER indicator light is on, if the
temperature knob is rotated to any specic temperature but the red HEATING
indicator light does not turn on and the temperature does not rise. At this time,
twist and open the black lid of RESET counter-clockwise on the panel manually, if
a small black button inside sticks out about 5mm, it means the temperature limiter
has already worked. If user wants to use the machine again, need to reset the
temperature limiter as follows: (1) Wait for 10 minutes in case the temperature is
still higher than the pre-set one. (2) If the RESET lid has not been opened yet, twist
and open it counter-clockwise manually. (3) Press the small black button inside the
RESET lid to reset. (4) Twist the lid back and use the machine normally.
4.
5.
6.
7.
8.
9.
10.
1 2
Loading ...
Loading ...