Loading ...
Loading ...
Loading ...
14 15
ENEN
Routine Maintenance
3. Remove the filter and tap its basket gently.
4. Rinse the dust bin and filter with water and dry them completely
before reinstalling.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects to prevent
damage.
Rinse the dust bin and filter with clean water only. Do not use any detergent.
Use the dust bin and filter only when they are completely dry.
12
6
111
57
210
48
39
Note:
Clean the Mopping Module
1. Slide the two release clips on the side of water tank to remove
the mopping module, and then pull the mop pad o the mopping
module.
2. Pour out the water in the tank. Clean with water only and leave
to air dry before re-installing.
Note: Do not expose the tank to the sun directly.
Routine Maintenance
3. Clean the mop pad with water only and leave to air dry before
re-installing.
4. If slow water flow occurs, or the outflow is not well-distributed,
please clean the air hole in the cover of the water tank.
Remove the pad from the mopping module before cleaning it, and make sure dirty
water does not flow back into the water outlet to avoid clogging.
Note:
Clean the Main Brush
1. Press the brush guard clips inwards to remove the brush guard
and lift the brush out of the robot.
2. Pull out the brush cover as shown in the diagram. Use the
included cleaning tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush excessively. Otherwise,
the brush may be damaged.
12
6
111
57
210
48
39
Loading ...
Loading ...
Loading ...