Loading ...
Loading ...
Loading ...
Bake-n-Warm TM Double Oven Light Operation (some models):
The Bake-n-Warm TM Double Oven light operates with the upper
oven light and automatically turns ON when the upper oven door
is opened. If equipped, the Bake-n-Warm TM Double Oven light
may also be manually operated by pressing the @ pad.
To Remove the Bake-n-Warm TM Double Oven
Drawer & Replace the Oven Light:
1. Beforedrawerremoval, besuretoturn
OFF the Bake-n-Warm TM Double Oven
and let the drawer area cool completely.
2. Pull the drawer away from the oven.
Using a phillips-head screwdriver
remove the two d rawer screws from the
insides of the front oven drawer
compartment (See Fig. 1).
3. With one hand hold the drawerfront in
place. Use your other hand to pull the
glide away from the oven (See Fig. 2)
until the glide hook disengages (See
Fig. 3).
4. Repeat from step 3above for theother
side of the drawer.
5. With BOTH glide hooks disengaged,
carefully lift the drawer up and away
from the oven. Push both drawer glides
into lower oven cavity.
6. Replace the lower oven light with a 40
Watt Appliance light bulb (Refer to
Fig.5).
Be sure the range is
unplugged and all parts are COOL before
replacing oven light. Weara leather-faced
glove for protection against possible broken
glass. UseCAUTION when reaching across
the oven element and brackets. These
parts may be sharp and cause cuts.
Fig. 2
Fig. 1 Glide Hook Disengaged Glide Hook Engaged
Fig. 3 Fig. 4
Fig. 5
To replace Bake-n-Warm TM Double Oven Drawer:
1. Puii both drawer glides and fully extend outward from lower oven cavity.
2. Carefully rest the drawer on top of both glides.
3. Adjust the drawer position on top of the rails until both of the drawer side slots are correctly engaged with the glide hooks
(See Fig. 4).
4. Pull the drawer forward to line up the drawerwith both screw holes inthe glides. Using a phillips-head screwdriver replace
the two screws removed from the inner drawer sides.
5. Replace drawer rack if removed.
6. CIoselowerovendrawer.
17
Loading ...
Loading ...
Loading ...