Loading ...
Loading ...
Loading ...
Using a Phone to Adjust the Watch’s Time
You can pair the watch with a phone to have
the watch adjust its time setting in accordance
with the phone time.
l
Auto Time Adjustment
12:30
● If the watch is not showing the correct
time...
If the watch does not indicate the correct time
even after it receives a signal or connects with
the phone, correct the hand and date indicator
positions.
l
Using CASIO WATCHES to Make
Adjustments
l
Using Watch Operations to Make
Adjustments
Checking the Receive
Operation Result
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2. Press (B).
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a signal or connection with a
phone.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
The day of the week hand indicates
details about the receive (acquisition)
operation.
“P”: GPS signal time or phone time
information and location information
“N”: GPS signal time information or time
calibration signal
30
Day of the week hand
Second hand
Note
●
Even if there was a successful receive
operation, the second hand will point
to “N(NO)” if you adjusted the time
setting manually.
●
If you do not perform any watch
operation for about one or two seconds
after location information is acquired or
after establishing a connection with a
phone and adjusting the time, the
watch will display the acquired Home
City and the day of the week hand will
indicate the rough latitude of your
current location.
30
Home City
Equator
South Pole
North Pole
Latitude
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it (Airplane Mode). To re-
enable auto time adjustment, perform the
same operation again.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2. Press (B).
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a signal or connection with a
phone.
30
3. Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
●
If more than 10 seconds elapse before
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4. Rotate the crown to enter the Airplane
Mode.
N(NO): Airplane Mode enabled
Y(YES): Airplane Mode disabled
30
Crown
Operation Guide 5531
6
Loading ...
Loading ...
Loading ...