Secura K15-F1E Electric Kettle Water Boiler for Tea Coffee Stainless Steel 1.5L Large Cordless Hot Water Pot BPA Free with Auto Shut-Off Boil-Dry Protection LED Light 120V/1350W

User Manual - Page 9

For K15-F1E.

PDF File Manual, 16 pages, Read Online | Download pdf file

K15-F1E photo
Loading ...
Loading ...
Loading ...
5
Copyright 2018-2020 Secura, Inc. All rights reserved. www.thesecura.com
SAFETY INSTRUCTIONS
Carefully remove your product and all documentation from the box. Storing your product in
its original box helps to protect it while not in use.
The power cord is stored on the underside of the base. For safety reasons, only unwind
enough of the power cord to reach the outlet and keep the power cord stored underneath
when not in use.
Remove the kettle from the base before fi lling or pouring.
Use purifi ed or deionized water, when possible, to minimize mineral build-up in the kettle.
If water drips onto the base, wipe dry before placing the kettle on the base.
Never touch the interior of the kettle or lid during or immediately following use. The exterior
body and the handle will remain cool, however touching the stainless steel interior can
result in burns or scalding.
Do not attempt to use the kettle without the lid locked securely in the closed position.
The kettle turns off automatically when removed from the base.
Be careful of steam coming from the spout, especially while pouring or if adding water
immediately after boiling.
Pour slowly and do not over-tilt to avoid the risk of splashing
The Boil Dry Protection Sensor turns the kettle off automatically when it detects that the
kettle is empty. If the Boil Dry Protection feature is activated, please allow the kettle to cool
down at least 10 minutes before refi lling.
The kettle is only to be used with the power base provided.
KETTLE PREPARATION
Preparing your kettle for fi rst time use:
1. Remove the kettle from the base.
2. Press the LID RELEASE and fi ll the kettle with cold water until it reaches the interior MAX
line.
3. Close the lid, place the kettle onto the base and plug the power cord into an outlet.
4. Press the ON/OFF switch into the ON position. The switch will illuminate and remain
on until the water comes to a boil (212°F). Once the water boils, the kettle shuts off
automatically in approximately 20 seconds, the indicator light turns off and the ON/OFF
switch returns to the OFF position.
5. Carefully remove the kettle from the base, discard the water and allow the kettle to cool for
1 minute.
OPERATING INSTRUCTIONS
DOUBLE WALL ELECTRIC WATER KETTLE
Loading ...
Loading ...
Loading ...