Loading ...
Loading ...
Fill the water tank:
1. Pull out the water tank
2. Fill the water tank with cold and clean water. Make sure that water level is between “Min”
minimum level and “Max” maximum level.
3. To increase the cool effect insert the ice box in the water tank.Before use ice box, they
must be filled by water and put in the refrigerator until they are completely frozen.
4. Close the water tank.
Attention!
1. Make sure the product is unplugged from the mains before filling or refilling the water.
2. Only use water in the water tank. Do not add any chemicals ,oils or other additives.
3. Only use cold water in the water tank(previously boiled)
4. Make sure the water level in the water tank is between minimum level .( indicated by
“Min”)and maximum level(indicated by “Max”)
Place the unit on a firm level surface and plug it into a socket. Power indicator light reminding
this products in standby mode. Turn on "
” button ,default setting is in middle speed, Turn
it again, products in standby .
1. Speed key
: Press this key to select middle ,high ,low fan speed.
2. Mode key “
”,default setting is in normal wind. Press this key to set from normal wind,
natural wind, sleep wind
3.Swing key
: press this key, the wind direction can swing flatly, and the swing indicator
light is on. Press again to cancel the function
4. Timer key
: press this key, the timer from 0 to 8 hours, each pressing 1hour.
5. Cooling key
: press this key, start this function, and if you add the freezing ice crystal
box in the water tank,air blow out temperature will much more cooling. Press it again to
cancel the function.(make sure water level is above min.line)
Remote control and panel display：
3
Loading ...
Loading ...
Loading ...