Loading ...
Loading ...
Loading ...
MAINTAINANCE OF THE DUST CONTAINER & FILTERS
1. Remove the dust container as shown on page 7
Hold the dust container lid and with the other hand rotate the
container in an anti-clockwise direction to the unlock position.
2. Hold the container lid and rotate the dust separator in an
anti-clockwise direction to the unlock position.
3. Remove the pre-motor filter from inside the dust separator
Hold over the waste bin, you may need to tap the sides to
release all the dust.
4. Wash the filter under a tap until the water runs clear.
5. Leave the filter to dry for at least 24hours and ensure this is
fully dry before placing it back into the dust separator and re-fit
into the container.
Note: The pre-motor filter will need to be maintained regularly depending on usage volume.
CHECKING FOR & REMOVING A BLOCKAGE
IMPORTANT ensure the vacuum cleaner is switched off before
clearing any blockages or carrying out any maintenance.
Empty the dust container.
Check that the rotating brushbar can rotate and is free from
debris and hair.
Stretch the hose to full length and check for any blockages.
Check for blockages in the hose socket.
Loading ...
Loading ...
Loading ...